rubber tailgate bumpers?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tuck · 12-25-2003, 04:38 PM

I have new bedsides and am installing the rubber bumpers, I see where the round one goes but where does the square ones go?

neonlarry · 12-25-2003, 05:32 PM

They screw onto the bed about half way up, and will be inbetween the "straps" that keep the gate from opening to far, and the bedside when the gate is closed. Hope that helps.

Tuck · 12-25-2003, 07:27 PM

so they mount towards the tail lite. between the staps and the bedside?

neonlarry · 12-25-2003, 08:29 PM

They go towards the tailgate, there should be 2 holes for them to screw into.

Tuck · 12-25-2003, 09:52 PM

I have new goodmark bedsides there are no holes.

neonlarry · 12-26-2003, 12:37 AM

If you give me your e-mail, I will get you a picture tomorrow. I cant attach pics, but e-mailing one is fine.

Hutch · 12-26-2003, 01:22 AM

Tuck
This is not a good pic but it will give you an idea.
I could get you a good measurement later.

Tuck · 12-26-2003, 09:57 AM

thanks for the picture.

**Canadian694x4** · 12-26-2003, 02:37 PM

I have 2 shots from different angles...they may help...

**Canadian694x4** · 12-26-2003, 02:38 PM

they seem to be almost in line with the top of the red taillight lens...

neonlarry · 12-26-2003, 02:44 PM

6 and 7/16 inches from the bed floor to the bottom of the bumper.

Tuck · 12-26-2003, 03:49 PM

Thats what I needed.

Thanks guys.

12-25-2003, 04:38 PM	#1
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	rubber tailgate bumpers?? I have new bedsides and am installing the rubber bumpers, I see where the round one goes but where does the square ones go?

12-25-2003, 05:32 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	They screw onto the bed about half way up, and will be inbetween the "straps" that keep the gate from opening to far, and the bedside when the gate is closed. Hope that helps. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-25-2003, 08:29 PM	#4
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	They go towards the tailgate, there should be 2 holes for them to screw into. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-26-2003, 12:37 AM	#6
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	If you give me your e-mail, I will get you a picture tomorrow. I cant attach pics, but e-mailing one is fine. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-26-2003, 01:22 AM	#7
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	Tuck This is not a good pic but it will give you an idea. I could get you a good measurement later. Attached Images __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

12-25-2003, 07:27 PM	#3
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	so they mount towards the tail lite. between the staps and the bedside?

12-25-2003, 09:52 PM	#5
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	I have new goodmark bedsides there are no holes.

12-26-2003, 09:57 AM	#8
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	thanks for the picture.

12-26-2003, 02:37 PM	#9
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	I have 2 shots from different angles...they may help... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-26-2003, 02:38 PM	#10
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	they seem to be almost in line with the top of the red taillight lens... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-26-2003, 02:44 PM	#11
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	6 and 7/16 inches from the bed floor to the bottom of the bumper. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-26-2003, 03:49 PM	#12
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	Thats what I needed. Thanks guys.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.