T350/NP205 and many other parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 12-15-2003, 02:12 PM

Clean used T350 mated to NP205 transfercase (with adapter)$250. (promised to another member)

Stock 4psd out of 1970 2 wheel drive pickup. Has less than 90K miles on it. $75

2 misc SBC blocks and 4 heads $40/all.

complete 1970 coil spring rear axle. I beleive it is 3.73/open carrier. $75

good left bedside off of 71 longbed. $50 (traded)

good steel longbed floor with wheeltubs. no rust through, not badly warped. $35

good shortfleetside bedfloor with wheeltubs. no rust through, not badly warped. $100

left short fleet bedside in good shape $125 (traded)

Located In Oregon. Sorry no shipping.

email me at bob.hines@eweb.eugene.or.us

'68 K-10 · 12-15-2003, 02:20 PM

could you post some pics i need the tranny transfer left long bedside and bed floor, but you are far away hopefully i can try to figure something out

cheyenne10 · 12-15-2003, 02:56 PM

I struggle with reducing pics to post on board. Email me at bob.hines@eweb.eugene.or.us and I will try ot get some pictures to you. I work all day and its dark when I'm home. The best bet would be Friday afternoon. Not to discourage you but shipping on most of this would be very cost prohibitive unless you have a shipping connection or know someone traveling. I don't have time or skills to mess with expensive crating.

breeh · 12-15-2003, 03:22 PM

e-mail sent....

danho · 12-15-2003, 08:52 PM

where in oregon are you?
dan.

bouncytruck · 12-15-2003, 09:06 PM

What kind of shape is the tranny in? Does it need rebuilding? What year is the tranny/t-case combo out of? Is it a "K" case tranny? Does the t-case have the shifter & Linkages? Where in Oregon are you?

Sorry for all the questions, I'm in need of a transmission.

cheyenne10 · 12-16-2003, 03:37 AM

Breeh has 1st shot at this. If he doesn't want it for some reason I'll let next in line know.

cheyenne10 · 12-16-2003, 02:16 PM

Answererd all inquires so far.

cheyenne10 · 12-27-2003, 06:00 PM

Any more interest?

*1tonswb* · 12-28-2003, 01:37 AM

What kind of shape is the bedside in? Where in Oregon are you?

12-15-2003, 02:12 PM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	T350/NP205 and many other parts for sale Clean used T350 mated to NP205 transfercase (with adapter)$250. (promised to another member) Stock 4psd out of 1970 2 wheel drive pickup. Has less than 90K miles on it. $75 2 misc SBC blocks and 4 heads $40/all. complete 1970 coil spring rear axle. I beleive it is 3.73/open carrier. $75 good left bedside off of 71 longbed. $50 (traded) good steel longbed floor with wheeltubs. no rust through, not badly warped. $35 good shortfleetside bedfloor with wheeltubs. no rust through, not badly warped. $100 left short fleet bedside in good shape $125 (traded) Located In Oregon. Sorry no shipping. email me at bob.hines@eweb.eugene.or.us __________________ Bob Last edited by cheyenne10; 12-27-2003 at 05:59 PM.

12-15-2003, 02:20 PM	#2
'68 K-10 Registered User Join Date: May 2002 Location: RAVENNA, MI. Posts: 70	could you post some pics i need the tranny transfer left long bedside and bed floor, but you are far away hopefully i can try to figure something out __________________ '68 K-10 IN PROGRESS OF A FIRST TIME RESTO. ANY ADVICE IS NEEDED. I'M IN NEED OF SOME PARTS TRUCKS NEAR MICH. THANKS

12-15-2003, 02:56 PM	#3
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	EMAIL ME DIRECT I struggle with reducing pics to post on board. Email me at bob.hines@eweb.eugene.or.us and I will try ot get some pictures to you. I work all day and its dark when I'm home. The best bet would be Friday afternoon. Not to discourage you but shipping on most of this would be very cost prohibitive unless you have a shipping connection or know someone traveling. I don't have time or skills to mess with expensive crating. __________________ Bob

12-15-2003, 03:22 PM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	e-mail sent.... __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

12-15-2003, 09:06 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	What kind of shape is the tranny in? Does it need rebuilding? What year is the tranny/t-case combo out of? Is it a "K" case tranny? Does the t-case have the shifter & Linkages? Where in Oregon are you? Sorry for all the questions, I'm in need of a transmission. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-15-2003, 08:52 PM	#5
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	where in oregon are you? dan.

12-16-2003, 03:37 AM	#7
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	trans/t-case Breeh has 1st shot at this. If he doesn't want it for some reason I'll let next in line know. __________________ Bob

12-16-2003, 02:16 PM	#8
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	TTT Answererd all inquires so far. __________________ Bob

12-27-2003, 06:00 PM	#9
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	updated with some new prices Any more interest? __________________ Bob

12-28-2003, 01:37 AM	#10
1tonswb Account Suspended Join Date: Nov 2003 Location: Oregon Posts: 300	What kind of shape is the bedside in? Where in Oregon are you?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.