Power Brake Conversion Thoughts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pappyx3! · 03-07-2014, 11:26 AM

Hi All, New to the forum really enjoying the talk and pics.

Just got a 62 C10, I would like to convert it to a power brakes but I don't have the funds to do a disc brake conversion at this time too. What's your thoughts on making the PB conversion but leaving the front drums brakes for now?

Thanks,

Robert Haas · 03-07-2014, 11:47 AM

Are you thinking about building a dual res. system?

Problem with updating to a modern dual circuit master cylinder and booster set up is the proportioning valve won't work, you will end up needing an adjustable valve.

disc brake conversions can be done with wrecking yard parts for pennies.

*Sharps40* · 03-07-2014, 12:26 PM

If you install dual master resevour Drum/Drum power coversion.....NO proportioning valve is required. The proportioning is in the master cylinder itself and in the pedal ratio you select, 6 to one manual or about 4 to 1 power (by relocating the link in the pedal).

Check the FAQ, there are excellent threads covering conversion from single resevour manual systems to dual manual drum/drum and converting from single manual to dual power drum/drum.

Contact Captainfab on this board for the mounting bracket that make the dual power drum/drum job pretty simple and requires no extra holes in your firewall.

Pappyx3! · 03-07-2014, 01:14 PM

I am planning to install the dual reservoir system. I appreciate all you thoughts and suggestions.

Priority right now is cleaning up some poor wiring that has been done in the past, going over the safety items.

*Sharps40* · 03-07-2014, 01:37 PM

Rock on....start, go and stop!

**PGSigns** · 03-07-2014, 01:39 PM

My 66 is power brakes with drum all round. Works well. I also used the bracket from Capt fab on both my trucks and it does make it easy. Works well.
Jimmy

**Captainfab** · 03-07-2014, 04:35 PM

For power drum/drum brakes, you'll want to use a '67-'70 booster and master cylinder. It will just bolt on with one of my booster brackets. Are you keeping the manual trans with hydraulic clutch or are you converting to an auto trans?

Pappyx3! · 03-07-2014, 04:48 PM

I'm picking this project up where someone else stopped... it has a 383 Stroker motor and a turbo 400 AT. Would the same booster and master cylinder work if I did the disc brake conversion on the front later on?

Capt. checked out your link. Nice work.

03-07-2014, 11:26 AM	#1
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Power Brake Conversion Thoughts Hi All, New to the forum really enjoying the talk and pics. Just got a 62 C10, I would like to convert it to a power brakes but I don't have the funds to do a disc brake conversion at this time too. What's your thoughts on making the PB conversion but leaving the front drums brakes for now? Thanks,

03-07-2014, 11:47 AM	#2
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Re: Power Brake Conversion Thoughts Are you thinking about building a dual res. system? Problem with updating to a modern dual circuit master cylinder and booster set up is the proportioning valve won't work, you will end up needing an adjustable valve. disc brake conversions can be done with wrecking yard parts for pennies.

03-07-2014, 12:26 PM	#3
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: Power Brake Conversion Thoughts If you install dual master resevour Drum/Drum power coversion.....NO proportioning valve is required. The proportioning is in the master cylinder itself and in the pedal ratio you select, 6 to one manual or about 4 to 1 power (by relocating the link in the pedal). Check the FAQ, there are excellent threads covering conversion from single resevour manual systems to dual manual drum/drum and converting from single manual to dual power drum/drum. Contact Captainfab on this board for the mounting bracket that make the dual power drum/drum job pretty simple and requires no extra holes in your firewall. Last edited by Sharps40; 03-07-2014 at 12:48 PM.

03-07-2014, 01:14 PM	#4
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Re: Power Brake Conversion Thoughts I am planning to install the dual reservoir system. I appreciate all you thoughts and suggestions. Priority right now is cleaning up some poor wiring that has been done in the past, going over the safety items.

03-07-2014, 01:37 PM	#5
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: Power Brake Conversion Thoughts Rock on....start, go and stop!

03-07-2014, 01:39 PM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Power Brake Conversion Thoughts My 66 is power brakes with drum all round. Works well. I also used the bracket from Capt fab on both my trucks and it does make it easy. Works well. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

03-07-2014, 04:35 PM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Power Brake Conversion Thoughts For power drum/drum brakes, you'll want to use a '67-'70 booster and master cylinder. It will just bolt on with one of my booster brackets. Are you keeping the manual trans with hydraulic clutch or are you converting to an auto trans? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-07-2014, 04:48 PM	#8
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Re: Power Brake Conversion Thoughts I'm picking this project up where someone else stopped... it has a 383 Stroker motor and a turbo 400 AT. Would the same booster and master cylinder work if I did the disc brake conversion on the front later on? Capt. checked out your link. Nice work. Last edited by Pappyx3!; 03-07-2014 at 04:59 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.