Rack fittings

[Hart_Rod]

Anyone know the part number for the 6AN fittings to use in a mustang rack for my Porterbuilt setup? Thanks,

Rob

[lolife99]

This is what I used for a rack with NON-metric fittings.
http://www.unisteer.com/tie-rods-ser...-fittings.html

Some racks use metric fittings.
This is another good thread,...
http://67-72chevytrucks.com/vboard/s....php?p=5126331
Unisteer has a good selection of fittings in different styles.
(90 degree, straight, etc)

You might check with Pro Performance and see if they stock them also.

[Hart_Rod]

Originally Posted by lolife99

This is what I used for a rack with NON-metric fittings.
http://www.unisteer.com/tie-rods-ser...-fittings.html

Some racks use metric fittings.
This is another good thread,...
http://67-72chevytrucks.com/vboard/s....php?p=5126331
Unisteer has a good selection of fittings in different styles.
(90 degree, straight, etc)

You might check with Pro Performance and see if they stock them also.

Thanks Keith! Dave at PB, said they use Unitsteer part numbers 8021650 and 8021660. I ended up ordering them from Summit. Take care,

Rob

[lolife99]

Cool.
Appears you have the 9/16" and 5/8" fittings.

http://www.unisteer.com/power-steeri...gs/page_1.html

[Hart_Rod]

Originally Posted by lolife99

Cool.
Appears you have the 9/16" and 5/8" fittings.

http://www.unisteer.com/power-steeri...gs/page_1.html

That's what Dave said to use. I guess I'll know for sure when they show up.....