The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board > Blazer and Suburban Stuff

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-21-2013, 03:46 AM   #26
robs71k5
K5drive
 
robs71k5's Avatar
 
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 815
Re: A ton of 69-72 blazer truck stuff

Mtully79
I here you on the latch assembly I am working a plan on reproduction of this part .I have to tell you it is a rare find if you can latch onto one .The parts to even fabricate it are expensive $32 just for the shaft with square hole in it .then it still needs to be machined and welded with the correct spring for the latch return . I'm at $45 so far and I still need the machine work for the sample part I"m getting built so I can easily see me spending over $100 all said and done .I have ordered enough square stock to build four latches but again everything else I get $20-30 bucked to death cause of machine work and springs as I do the welding .
robs71k5 is offline   Reply With Quote
Old 12-21-2013, 03:51 AM   #27
robs71k5
K5drive
 
robs71k5's Avatar
 
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 815
Re: A ton of 69-72 blazer truck stuff

Ctgry5 those latch retainers are sold but I have one singular piece left.Its the black one in the picture . Sorry I wish I had a lot more of this stuff it's like gold
robs71k5 is offline   Reply With Quote
Old 12-21-2013, 02:05 PM   #28
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,956
Re: A ton of 69-72 blazer truck stuff

How much for the front Center Brackets for the top?
__________________
Kirk
72 Blazer CST 4wd highlander
Blazerowner is offline   Reply With Quote
Old 12-21-2013, 04:32 PM   #29
JimH2828
Senior Member
 
Join Date: Oct 2012
Location: Cumming GA
Posts: 621
Re: A ton of 69-72 blazer truck stuff

I'm interest in the below items. Please PM me prices.

1) Pic 2 - 4x4 pitman arm
2) Pic 9 - rubber square with 2 holes - seat bracket floor cushion
3) Pic 9 - rear bench hole downs
4) Pic 9 - rear hatch slide set, nicer ones - if they are original
5) Pic 15 - Duel horns - if they are a proper Chevy truck AC Delco functioning high and low pair
6) Pic 15 - Accelerator pedal arm bracket - if it is correct for a 70'

Thanks
Jim
JimH2828 is offline   Reply With Quote
Old 12-26-2013, 01:22 PM   #30
PatsFanWilly
Registered User
 
Join Date: Aug 2009
Location: Central Kansas
Posts: 47
Re: A ton of 69-72 blazer truck stuff

Im interested in the side mirrors. PM me the price if you could please.
PatsFanWilly is offline   Reply With Quote
Old 12-26-2013, 03:49 PM   #31
mtully79
Registered User
 
mtully79's Avatar
 
Join Date: Apr 2007
Location: Acworth, GA
Posts: 441
Re: A ton of 69-72 blazer truck stuff

Quote:
Originally Posted by robs71k5 View Post
Mtully79
I here you on the latch assembly I am working a plan on reproduction of this part .I have to tell you it is a rare find if you can latch onto one .The parts to even fabricate it are expensive $32 just for the shaft with square hole in it .then it still needs to be machined and welded with the correct spring for the latch return . I'm at $45 so far and I still need the machine work for the sample part I"m getting built so I can easily see me spending over $100 all said and done .I have ordered enough square stock to build four latches but again everything else I get $20-30 bucked to death cause of machine work and springs as I do the welding .
That always seems to be the way doesn't it? I'll keep looking and hope I get lucky. I still need to get a top off you for my soft top installation. I'll be in touch in the new year. Hope you're enjoying a nice holiday!
mtully79 is offline   Reply With Quote
Old 12-30-2013, 11:48 PM   #32
MuppetMan
Registered User
 
MuppetMan's Avatar
 
Join Date: Nov 2012
Location: CANADA
Posts: 147
Re: A ton of 69-72 blazer truck stuff

Still have the grille? I'd take that if we can figure out shipping to castlegar British Columbia
MuppetMan is offline   Reply With Quote
Old 12-31-2013, 02:09 AM   #33
White70C20
Registered User
 
White70C20's Avatar
 
Join Date: Oct 2012
Location: Kansas and Iowa
Posts: 349
Re: A ton of 69-72 blazer truck stuff

Do you still have the steering wheel? If so, what condition is it? How much are you asking for it?
__________________
White70C20

1970 Blue C20 - 250, 4 speed
1985 Ford Thunderbird
2005 Pontiac G6
White70C20 is offline   Reply With Quote
Old 01-19-2014, 05:17 PM   #34
robs71k5
K5drive
 
robs71k5's Avatar
 
Join Date: Nov 2004
Location: burnaby BC Canada
Posts: 815
Re: A ton of 69-72 blazer truck stuff

Tailgate. Sold
robs71k5 is offline   Reply With Quote
Old 03-15-2014, 02:09 AM   #35
bertvert72
Registered User
 
bertvert72's Avatar
 
Join Date: Dec 2009
Location: Dickson,Tn
Posts: 216
Re: A ton of 69-72 blazer truck stuff

Do you still have the seat brackets?
__________________
Bret
Here's a link to my build
http://67-72chevytrucks.com/vboard/s...d.php?t=577889
bertvert72 is offline   Reply With Quote
Old 03-15-2014, 11:27 PM   #36
kevmac
Registered User
 
kevmac's Avatar
 
Join Date: Jun 2012
Location: ft worth tx
Posts: 135
Re: A ton of 69-72 blazer truck stuff

do you still have a set of hatch sliders??
thanx
kevmac is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com