03-23-2014, 03:46 PM | #1 |
Registered User
Join Date: Dec 2013
Location: Dunwoody,Ga
Posts: 443
|
Power Steering Hose
What power steering hose is available to connect new pump to old gear box? I know the threads are differ on each end.
Thanks |
03-23-2014, 04:40 PM | #2 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: Power Steering Hose
what year truck?
on my 71 c-10 i swaped the 1 inch fitting in the back of the new pump from a pump of the same year as the my truck and used the stock hose, the fitting cost my 72 cents at the local junk yard and since i can use the stock hose i can get one at any store if it ever goes out
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
03-24-2014, 12:52 AM | #3 |
Registered User
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
|
Re: Power Steering Hose
I had replaced my original pump with an Oreillys pump before the swap. The replacement pump had the correct fitting on the pump I just transferred the fitting and lines to the lsx pump. Fit like a glove. Maybe you can check to see if your pump had been replaced and has the fitting already. Keep us posted
Good luck.
__________________
1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD* GO GO!!! |
03-24-2014, 10:34 AM | #4 |
Registered User
Join Date: Dec 2013
Location: Dunwoody,Ga
Posts: 443
|
Re: Power Steering Hose
Thanks Never had a pump apart. Pushing 300k on a project engine I got from a buddy. Does the high pressure fitting unscrew to remove tank? If so I suppose I could just swap fittings from my pump to new one.
Going to swap in a Chevolet performance 'connect and cruise' package. I an going to get the Vintage Air Gen IV system and their LS FrontRunner™ Drive System. This put compressor high and avoid frame mods. |
03-24-2014, 10:35 AM | #5 |
Registered User
Join Date: Dec 2013
Location: Dunwoody,Ga
Posts: 443
|
Re: Power Steering Hose
Forgot to answer. Its a 70 side side short bed.
|
03-24-2014, 03:22 PM | #6 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: Power Steering Hose
Yup the high pressure fittings will swap
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
03-24-2014, 04:06 PM | #7 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Power Steering Hose
The fitting on the backside of pump will unscrew and screw right back inside the new pump. At least thats how I and Hawks did it. It's spring loaded so be carefull when taking it a part. I thought I had lost part of it and looked all over the floor for parts. Finally realized it didn't.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
03-24-2014, 07:15 PM | #8 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Power Steering Hose
I run an 84 Burb box on my old ride (metric/o ring fittings)....the stock 2000 GMC hose fit the mess, on my old 69 with just a 'tweek" on the return line on the pump You really have to love some of the mix/match on parts over the yrs! Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
03-24-2014, 09:59 PM | #9 |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: Power Steering Hose
You'll need to do some research, but I don't think the VA frontrunner system comes with a truck style power steering pump, I believe they use an F body type pump, in which case you can't swap out that fitting.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
Bookmarks |
|
|