|
Re: Gas guage only registers 1/4 full
Quote:
Originally Posted by duckdude
I cant get mine to work at all even with new sending unit. brown wire from tank to fuse box is good. tank is grounded good. im about to pull my hair out.
|
Do you have a 12V test light or a DVOM? Have you checked to see if you have power to the gauge? If the gauge is not doing anything at all then it is most likely not getting power to the gauge. Check for power right on the gauge studs with the key in the run position but not have the engine started. Also check for a burn spot on the printed circuit board on the back of your cluster.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com
I am also a dealer for Counterpart for gauge cluster parts only.
Also see my facebook page, CG&C
|
03-31-2014, 09:07 PM
Threaded Mode