What a way to start the New Year!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84Stepper · 01-01-2004, 12:46 AM

Blew the doors off a new dodge hemi pickup from a dead stop at a light. A toast to Chevy Power!! Happy New Year everybody it's time to go out. See you next year.

gldevall · 01-01-2004, 12:55 AM

Nice. I never can get one. Was it a singel or x-tra cab? Whenever I do get the chance, I am either pulling my trailer or have the 4-wheeler in the back. I did jump a silver GT on the way home today and he bit a little, but we never did get to go.

1974StepSide · 01-01-2004, 04:14 AM

Good Job!

AirMale · 01-01-2004, 06:16 AM

CHEERS!
My buddy just bought a 2wd quad cab Hemi truck this week. Maybe I should let him win the first race.

*mike reeh* · 01-01-2004, 07:30 AM

AirMale: curious, whats with the "9.0 liter" in your sig, followed by 383 cu? Whats the real deal?

mike

**old Rusty C10** · 01-01-2004, 12:44 PM

you go !! but what do ya expect ihave more respect for a toyota tundra than a dodge dodge is a piece of junk

gldevall · 01-01-2004, 01:31 PM

Quote:

Originally posted by mike reeh
AirMale: curious, whats with the "9.0 liter" in your sig, followed by 383 cu? Whats the real deal?

mike

He had a 383 in there, but just recently, about 2 or 3 months ago, replaced it with a massive ass big block.

84Stepper · 01-01-2004, 02:20 PM

It was a 2 door, my dad says I would never of beat the old hemi from the 60's. But hey they dident come in a truck did they?

AirMale · 01-01-2004, 05:14 PM

My new motor is a 548cu Merlin III w/PRO-FILER 350cc alum.heads and hydraulic roller. No track time with it yet

r0lf- · 01-01-2004, 06:52 PM

Quote:

Originally posted by 84Stepper
It was a 2 door, my dad says I would never of beat the old hemi from the 60's. But hey they dident come in a truck did they?

Did it have the hemi badges on the side? Most single cabs arent Hemi's, they just started putting in Hemis for the new year.

BaggedC10 · 01-01-2004, 06:59 PM

Actually, the Hemi V8 has been available in regular cab form since 2-3 months after it was offered in quad cab models.

Stingray42 · 01-01-2004, 09:38 PM

Quote:

Originally posted by AirMale
My new motor is a 548cu Merlin III w/PRO-FILER 350cc alum.heads and hydraulic roller. No track time with it yet

phantom dually · 01-01-2004, 11:32 PM

Yeah I saw a hot MILF in a standard cab HEMI yesterday!!

84Stepper · 01-02-2004, 12:14 AM

Anyone know the HP in the new Hemi? Just for comparison I'd like to know.

r0lf- · 01-02-2004, 06:26 PM

The HP numbers arent very impressive, its the TQ curve. Its basically flat as hell. Ill see if I can dig up a dyno sheet.

Jonboy · 01-02-2004, 07:03 PM

345 HP.

84Stepper · 01-02-2004, 11:22 PM

Thanks Jonboy, wish I knew what I have for HP, but it's the gears that really launch it! Anybody have a good guess from reading my sig?

ChevyGuyBC, cool video but wish it was clearer, hard to see because of the lighting.

01-01-2004, 12:46 AM	#1
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	What a way to start the New Year!! Blew the doors off a new dodge hemi pickup from a dead stop at a light. A toast to Chevy Power!! Happy New Year everybody it's time to go out. See you next year. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

01-01-2004, 12:55 AM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Nice. I never can get one. Was it a singel or x-tra cab? Whenever I do get the chance, I am either pulling my trailer or have the 4-wheeler in the back. I did jump a silver GT on the way home today and he bit a little, but we never did get to go. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

01-01-2004, 04:14 AM	#3
1974StepSide Play it Loud... Join Date: Aug 2002 Location: East San Jose, CA Posts: 465	Good Job! __________________ Big Moe =-=-=-= 1974 Cheyenne Super Stepside, 350/400, Hooker Headers, Flowmaster Mufflers... Needs new doors, fenders, hood, and paint. 1952 Chevy Pickup waiting to be brought back home!

01-01-2004, 06:16 AM	#4
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	CHEERS! My buddy just bought a 2wd quad cab Hemi truck this week. Maybe I should let him win the first race. __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

01-01-2004, 12:44 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	you go !! but what do ya expect ihave more respect for a toyota tundra than a dodge dodge is a piece of junk __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-01-2004, 07:30 AM	#5
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 683	AirMale: curious, whats with the "9.0 liter" in your sig, followed by 383 cu? Whats the real deal? mike

01-01-2004, 02:20 PM	#8
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	It was a 2 door, my dad says I would never of beat the old hemi from the 60's. But hey they dident come in a truck did they? __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

01-01-2004, 05:14 PM	#9
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	My new motor is a 548cu Merlin III w/PRO-FILER 350cc alum.heads and hydraulic roller. No track time with it yet __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

01-01-2004, 06:59 PM	#11
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Actually, the Hemi V8 has been available in regular cab form since 2-3 months after it was offered in quad cab models. __________________ 2001 Silverado bagged on 22's. Sold Last edited by BaggedC10; 01-01-2004 at 07:02 PM.

01-01-2004, 11:32 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yeah I saw a hot MILF in a standard cab HEMI yesterday!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-02-2004, 12:14 AM	#14
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Anyone know the HP in the new Hemi? Just for comparison I'd like to know. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

01-02-2004, 06:26 PM	#15
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	The HP numbers arent very impressive, its the TQ curve. Its basically flat as hell. Ill see if I can dig up a dyno sheet. __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

01-02-2004, 07:03 PM	#16
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	345 HP. __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-02-2004, 11:22 PM	#17
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Thanks Jonboy, wish I knew what I have for HP, but it's the gears that really launch it! Anybody have a good guess from reading my sig? ChevyGuyBC, cool video but wish it was clearer, hard to see because of the lighting. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.