Look what our friend just emailed me - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Randy70C-10* · 01-02-2004, 06:16 PM

You mean "slicknsmooth72"? May as well tell it like it is.

boilrman · 01-02-2004, 07:48 PM

sounds like the guy I bought a pair of trailing arms from. Went by the name smooth72? Anyway, he painted them(spraybomb) which didnt matter to me, but arms were in good shape. I got the pair for $108 shipped to Iowa.

I have no complaints, even if it is him.

Tx Firefighter · 01-02-2004, 07:59 PM

I bought some emblems from Slicknsmooth a couple of weeks ago. He insisted that he mail them to me first, and if I was happy with them, to send him the money.

I've never had someone do that before. He wanted to make damn sure that I was satisfied with them.

I won't jump on any bandwagon. He did me right.

SCOTI · 01-03-2004, 02:27 AM

Isn't James 'B', aka 'truckparts67_72' from Lone-Oak Tx., on the west side of the DFW metroplex & 'slicknsmooth72' from Greenville Tx., east of the metroplex?

Make sure before there's a guilty verdict rendered that you have the right defendant.

oldyeller · 01-03-2004, 06:45 AM

hey Scotti I think your a little off. lone oak is just east of greenville.. just fyi..

oldyeller · 01-03-2004, 06:47 AM

here is a map

SCOTI · 01-03-2004, 08:09 PM

Yep, I'm wrong. I even confirmed today that 'James B.' is in fact 'texparts' aka 'slicknsmooth72' from someone who purchased something from him recently.

OhioDan · 01-04-2004, 06:17 AM

He burnt me a while back on some rechromed door panel retainers. Said they were top of the line, and looked like new. When I got them, they looked like the old chrome had been stripped off,(acid dipped?) and then rechromed. Pits and all. It also looked like who ever packed them, was eating a glazed doughnut at the time. Stuff all over them. I just blew it off at the time, cause it seemed as though he was doing right by everyone else, and I just didn't want to stir it up on the board. Wish now I would've., maybe ya'll wouldn't have got burnt? This lesson cost me less than $50. , but it won't happen again. I've got 2 phone numbers for SlickNSmooth72/James if anyone wants them?

01-02-2004, 07:48 PM	#52
boilrman 70 Chevy 3/4t Join Date: Sep 2000 Location: Kokomo,IN USA Posts: 1,230	sounds like the guy I bought a pair of trailing arms from. Went by the name smooth72? Anyway, he painted them(spraybomb) which didnt matter to me, but arms were in good shape. I got the pair for $108 shipped to Iowa. I have no complaints, even if it is him. __________________ Find a job you love and you'll never have to work a day in your life. 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6 (rebuilt), 4 speed Kokomo,IN Last edited by boilrman; 01-02-2004 at 08:34 PM.

01-02-2004, 07:59 PM	#53
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I bought some emblems from Slicknsmooth a couple of weeks ago. He insisted that he mail them to me first, and if I was happy with them, to send him the money. I've never had someone do that before. He wanted to make damn sure that I was satisfied with them. I won't jump on any bandwagon. He did me right. __________________ I'm on the Instagram- @Gearhead_Kevin

01-03-2004, 02:27 AM	#54
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,094	Isn't James 'B', aka 'truckparts67_72' from Lone-Oak Tx., on the west side of the DFW metroplex & 'slicknsmooth72' from Greenville Tx., east of the metroplex? Make sure before there's a guilty verdict rendered that you have the right defendant. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-03-2004, 06:45 AM	#55
oldyeller Captain CAAAVVVMMMAAANNN! Join Date: Mar 2002 Location: Anna Texas Posts: 726	hey Scotti I think your a little off. lone oak is just east of greenville.. just fyi.. __________________ 72 LWB Fleetside C10 Custom 350/350 97 GMC Yukon 4X4 SLT Anna, Texas check out the project old yeller

01-03-2004, 06:47 AM	#56
oldyeller Captain CAAAVVVMMMAAANNN! Join Date: Mar 2002 Location: Anna Texas Posts: 726	here is a map Attached Images __________________ 72 LWB Fleetside C10 Custom 350/350 97 GMC Yukon 4X4 SLT Anna, Texas check out the project old yeller

01-02-2004, 06:16 PM	#51
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	You mean "slicknsmooth72"? May as well tell it like it is.

01-03-2004, 08:09 PM	#57
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,094	Yep, I'm wrong. I even confirmed today that 'James B.' is in fact 'texparts' aka 'slicknsmooth72' from someone who purchased something from him recently. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-04-2004, 06:17 AM	#58
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	He burnt me a while back on some rechromed door panel retainers. Said they were top of the line, and looked like new. When I got them, they looked like the old chrome had been stripped off,(acid dipped?) and then rechromed. Pits and all. It also looked like who ever packed them, was eating a glazed doughnut at the time. Stuff all over them. I just blew it off at the time, cause it seemed as though he was doing right by everyone else, and I just didn't want to stir it up on the board. Wish now I would've., maybe ya'll wouldn't have got burnt? This lesson cost me less than $50. , but it won't happen again. I've got 2 phone numbers for SlickNSmooth72/James if anyone wants them? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started. Last edited by OhioDan; 01-04-2004 at 08:45 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.