|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-27-2014, 10:10 AM
|
#1 |
|
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
High mount sanden 508 fittings
Hi All,
There seems to be a lot of options for fittings for the sanden compressor, some cheap and some expensive. I was wondering which fittings everyone has used to connect the hoses to the compressor on a squarebody truck? Thanks for any help. |
|
|
|
04-27-2014, 10:53 AM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: High mount sanden 508 fittings
Just go by a AC shop and let them make them up for you.That's what I did, they charged me like $25.00 to do them.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71  Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
04-27-2014, 01:12 PM
|
#3 |
|
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: High mount sanden 508 fittings
78 evap. and 78 condenser new hose and fittings for the Sanden
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
|
|
|
|
04-28-2014, 03:11 PM
|
#4 |
|
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
Re: High mount sanden 508 fittings
Thanks for the replies guys, just wasn't sure if I had to supply the fitting or if the A/C shop would have them on hand. Now I have to find an AC shop.
Ben |
|
|
|
|
04-28-2014, 03:24 PM
|
#5 |
|
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: High mount sanden 508 fittings
My A/C shop in Tucson, Century Auto Air conditioning has all the fittings and he had to fab two of them so I could use my existing parts. Air blows cold 20* but summer has not arrived yet!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
|
|
|
|
04-28-2014, 06:06 PM
|
#6 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: High mount sanden 508 fittings
Quote:
How does it keep from freezing up? 32* it will start freezing up and locking down the compressor.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
04-29-2014, 04:51 PM
|
#7 |
|
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
Re: High mount sanden 508 fittings
Question, is it fine to put the compressor on with belt and drive to ac shop without it hooked up? Also, I ordered a Vintage Air 04808-VMA from summit which is a sanden 508 style it this going to work? I thought it was an actual sanden compressor until after I ordered it and I just want to make sure it is a good brand.
I no nothing about AC.... |
|
|
|
|
04-29-2014, 05:32 PM
|
#8 |
|
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: High mount sanden 508 fittings
DO NOT hook the power 12VDC to the compressor wire, and it will be OK.
When it starts to get real cold I blend the heat control or turn it off! I am waiting for next month and all of June when it is over 100* it will never get that cold in a black truck!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
|
|
|
|
04-29-2014, 06:11 PM
|
#9 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: High mount sanden 508 fittings
Quote:
As far as it being a good brand I can't say but if it's a sanden brand it should be fine.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
04-29-2014, 07:04 PM
|
#10 |
|
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
Re: High mount sanden 508 fittings
Thanks guys, much appreciated. Is the vintage air compressor a good one?
|
|
|
|
|
04-29-2014, 10:01 PM
|
#11 |
|
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
Re: High mount sanden 508 fittings
Found a little mor on vintage and seems to have a good rep
|
|
|
|
|
04-29-2014, 11:00 PM
|
#12 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: High mount sanden 508 fittings
I used Classic air before the LSx motor swap and was very happy with it.
http://www.classicautoair.com/67_72_..._Chevy_AC.html
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
