The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-30-2014, 12:15 AM   #1
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
1974 CCSB project

I am putting my '74 CCSB project up for sale. The frame has been shortened, and it has all new 1/2 suspension under it currently. The front has been lowered with 3" Bell Tech spindles and new big block springs with 1 coil cut. The rear has the original 3/4 ton leaf springs and a rebuilt 3.73 geared 12 bolt with a new Eaton posi unit in it; lowered with a flip kit and 1/2 ton spring shackles. The truck also has new 20x8 (front) and 20x9.5 (rear) Ridler wheels with new Toyo tires; no miles on the tires. The bed is almost mint as well; the floor is clean enough that it could be painted and look like new.

I am currently in the middle of an LS swap right now. The 5.3 and 4L60E is out of a 2001 GMC Yukon, truck had just shy of 100K on it. The wiring harness is new from www.fuelinjectionconnection.com (DBW), the fuel tank was replaced with a new '87 EFI tank, along with a new FI fuel sender and Delco EP381 pump. While the engine was on the stand, I replaced the oil pan, pickup tube and dipstick with CTS-V parts for more ground clearance, water pump and intake gaskets were replaced, everything was cleaned and painted, and TBSS manifolds, Delco plugs and wires were added as well. Engine was set in place with Dirty Dingo sliding mounts as well. The gauges were upgraded to a 91 Suburban cluster, and a tach from GM Sport Salvage was added as well. I am sure there is a ton of stuff I can't remember doing right now, but it has become apparent that I will not have the time to finish the truck anytime soon. I would love to see it done, and hope it would go to a good home that would finish it. Looking for $7500 or best offer for everything I have to finish the truck. There are pics on my build thread; I will post a link to that thread tomorrow.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 05-30-2014, 03:45 AM   #2
bbbc10
Diggin The SquareLife
 
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
Re: 1974 CCSB project

man this sucks!!! sorry you gotta sell....got a few questions are you gonna get the ls swap running before you sell and any trades or jus cash?
bbbc10 is offline   Reply With Quote
Old 05-30-2014, 03:02 PM   #3
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
Re: 1974 CCSB project

I am still chipping away at getting it running, so that isn't an issue. I really don't have time for another project, though.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 05-30-2014, 03:52 PM   #4
bbbc10
Diggin The SquareLife
 
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
Re: 1974 CCSB project

that's good.....you not looking for another daily driver or anything or you want cash
bbbc10 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com