Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-05-2014, 12:09 AM | #1 |
Registered User
Join Date: May 2010
Location: newman lk, washington
Posts: 97
|
how to fill a blazer tank in a truck?
installing a blazer tank in the rear of my new project truck crew cab short bed cummins wanting some pics or ideas on how to fill?
|
06-05-2014, 07:51 AM | #2 |
Registered User
Join Date: Jul 2007
Location: Sims, NC
Posts: 531
|
Re: how to fill a blazer tank in a truck?
Here's how I did it. I remover the original filler neck with heat removing the solder. I then bought a custom fuel tank filler neck (lot's of places sell them) and bolted it right over the original hole. I then installed a door in the floor of the bed. Easy enough. Pics:
__________________
All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project |
06-05-2014, 07:59 AM | #3 |
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: how to fill a blazer tank in a truck?
Here is mine.
It was originally mounted in the same spot but straight to the bed floor with the original style gas cap but it wouldn't fill very well because of the pretty much immediate turn in the filler tube so we raised it to give it more filler tube before the turn. It now works great & will fill with a gas pump at full speed. |
06-05-2014, 03:06 PM | #4 |
Senior Member
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
|
Re: how to fill a blazer tank in a truck?
I was wanting to do this same tank setup in my swb.
My thought was to move the gas fill door to a rear location like a Blazer or Suburban. Any reason that wouldn't work?
__________________
2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold) |
06-05-2014, 07:43 PM | #5 |
Registered User
Join Date: Jul 2007
Location: Sims, NC
Posts: 531
|
Re: how to fill a blazer tank in a truck?
You might have to notch the frame to get the fill tube out there? Not sure. I thought about the same thing then went the easy route.
__________________
All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project |
06-05-2014, 10:56 PM | #6 |
Registered User
Join Date: Oct 2011
Location: hudson,wi
Posts: 805
|
Re: how to fill a blazer tank in a truck?
I'm planning of using a Blazer tank on my 81 c-10 swb and hide the filler behind one of the tail light assemblies. I've seen it done on the web before and I really want to try it but afraid I won't be able to pull it off since I'm fairly new to doing these types of mods. I can use all the help I can get.
RIZ |
06-06-2014, 10:27 AM | #7 |
Registered User
Join Date: Apr 2012
Location: Loretto Ky
Posts: 318
|
Re: how to fill a blazer tank in a truck?
subscribed!
|
06-06-2014, 06:52 PM | #8 |
Second Chance Program
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
|
Re: how to fill a blazer tank in a truck?
Also subscribed. I had planned on using everything from a suburban.
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work. |
Bookmarks |
|
|