3 spd floor shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RANDY COX · 07-03-2014, 10:28 PM

question for you guys, my uncle has a 54 with 3 0TT and was wondering does anybody make a good aftermarket 3 spd floor shifter, He's needing more gut room and needs to do this conversion in order to shorten the steering shaft and move the column closer to the dash to help with the gut, removing the gut is not an option as he's worked very hard to get.... Thanks.

OrrieG · 07-04-2014, 12:20 AM

A LONG time ago, I used Hurst products. Do not know about the column, it is enclosed, shortening will require resplineing it unless you want to risk cutting and welding, which I never recommend on steering parts.

RANDY COX · 07-04-2014, 06:26 AM

Thanks it would be a cut and weld and sleeved over then bolted..

geezer#99 · 07-04-2014, 08:35 AM

Here's what you need. Best you can get. Has a bolt on stick so you can install different height or shaped sticks. You need the install kit too.
I've used them for the same reason. Took me years to develop my 'Dunlop" too!!
http://www.summitracing.com/int/part...commendedparts

1project2many · 07-04-2014, 08:55 AM

Hurst used to make a pickup shifter with a longer handle.
http://www.summitracing.com/parts/huu-5010016

RANDY COX · 07-04-2014, 09:52 AM

Thanks guys...

07-03-2014, 10:28 PM	#1
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	3 spd floor shifter question for you guys, my uncle has a 54 with 3 0TT and was wondering does anybody make a good aftermarket 3 spd floor shifter, He's needing more gut room and needs to do this conversion in order to shorten the steering shaft and move the column closer to the dash to help with the gut, removing the gut is not an option as he's worked very hard to get.... Thanks. __________________ 1964 BBC 402 4x4

07-04-2014, 12:20 AM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 3 spd floor shifter A LONG time ago, I used Hurst products. Do not know about the column, it is enclosed, shortening will require resplineing it unless you want to risk cutting and welding, which I never recommend on steering parts. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-04-2014, 06:26 AM	#3
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 3 spd floor shifter Thanks it would be a cut and weld and sleeved over then bolted.. __________________ 1964 BBC 402 4x4

07-04-2014, 08:35 AM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: 3 spd floor shifter Here's what you need. Best you can get. Has a bolt on stick so you can install different height or shaped sticks. You need the install kit too. I've used them for the same reason. Took me years to develop my 'Dunlop" too!! http://www.summitracing.com/int/part...commendedparts

07-04-2014, 08:55 AM	#5
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: 3 spd floor shifter Hurst used to make a pickup shifter with a longer handle. http://www.summitracing.com/parts/huu-5010016

07-04-2014, 09:52 AM	#6
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 3 spd floor shifter Thanks guys... __________________ 1964 BBC 402 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.