NE Parting out 83 chevy 1/2 ton 4x4

[thinair]

Originally Posted by B_derK20

Does the truck have the wheel well moldings for the rear? Also what condition is the 4 headlight harness in?

Rear wheel mouldings are rotting away at the edges. Harness looks good but it does have a wire spliced in a two different places.

[thinair]

Originally Posted by BLT gmc

It does not look like there is a front sway bar set-up, but i will ask do you have a front swaybar set-up? Bruce

Front sway bar is there. Bushings are dried up and it is missing one u-mount for the front/top of it. $35 plus shipping.

[thinair]

Originally Posted by benoit454

is the flat top knuckle the ps or ds one and would you sell it separately if it's the ps one?

It is the RH one. Let me look and see if I have one laying around first before I part out the axle. I am leaving for Florida tomorrow so you are going to have to give me until Sunday or so to see.

[benoit454]

not a problem I need a flat top 6 lug for the passenger side but could use a matching set from a 44 with 6 lugs.

[B_derK20]

What kind of deal would you give me on the rear moldings, marker lights, tail lights, grill & bezels and headlight harness? Shipped to 81504. I realize the parts aren't perfect but from what I can see in the pics they'd be good enough for what I'm working on.

[BLT gmc]

I am interested in the sway bar. $35 quote does that include the spring plates that are threaded to hold the axle ends of the swaybar? I am local and will likely pick up. Thank you, Bruce

[thinair]

Originally Posted by BLT gmc

I am interested in the sway bar. $35 quote does that include the spring plates that are threaded to hold the axle ends of the swaybar? I am local and will likely pick up. Thank you, Bruce

Complete. Picking it up is fine but I left town yesterday and will not be back until sunday Sunday.

[thinair]

Originally Posted by B_derK20

What kind of deal would you give me on the rear moldings, marker lights, tail lights, grill & bezels and headlight harness? Shipped to 81504. I realize the parts aren't perfect but from what I can see in the pics they'd be good enough for what I'm working on.

I just left out of town and won't be back until Sunday. Let me measure it all up, the wheel moulding might ship by themselves because of size but I'll do the parts for $85 plus the shipping.

[B_derK20]

Ok. The price seems fair as long as the shipping doesn't kill me. I'll wait to hear from you when you get back.

[benoit454]

any luck on a ps flat top knuckle?

[BLT gmc]

Are you back in town? I would like to buy and pick up the front swaybar, mounts and spring plates. Please PM your Phone # and or address. Thank you, Bruce

[thinair]

Originally Posted by B_derK20

Ok. The price seems fair as long as the shipping doesn't kill me. I'll wait to hear from you when you get back.

Shipping everything together in one box will be $35.00

[B_derK20]

Ill take it. Pm sent.

[thinair]

Ttt

[Speeding Dakota]

How is the engine section of the wiring harness from the block to all the engine (not the light side). How much shipped to 17361?
Thanks

[Dovid]

Does the rear leaf hangers are in good shape ? (the leaf brackets on the frame)
I'M desperate to find a set...

[thinair]

Originally Posted by Speeding Dakota

How is the engine section of the wiring harness from the block to all the engine (not the light side). How much shipped to 17361?
Thanks

Crap! I saw this and forgot all about it. Engine harness has wires added to it that loop around all over the place. probably not a good one.

[thinair]

Originally Posted by Dovid

Does the rear leaf hangers are in good shape ? (the leaf brackets on the frame)
I'M desperate to find a set...

I will look, but it isn't something that I would be able to take off right away, too many hours at work right now.

[Dovid]

No problem ! keep me posted.