AZ WTB Power steering bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jurassic-1** · 07-19-2014, 06:31 PM

Looking for bracket and wheel well for a factory power steering on a 1964 c-10 We were told there is a hole in the wheel well with a clamp type bracket. I need to locate one. Does anyone have a photo of this unit?

sigshooter · 07-20-2014, 12:57 PM

Quote:

Originally Posted by Jurassic-1

Looking for bracket and wheel well for a factory power steering on a 1964 c-10 We were told there is a hole in the wheel well with a clamp type bracket. I need to locate one. Does anyone have a photo of this unit?

No hole in the wheel well or bracket, that I have ever seen anyways. There is a bracket that holds the hoses that bolts to the top inspection cover on the gearbox.

**t korinek** · 07-22-2014, 01:41 AM

we just got this piece, its not a 67-72 thinking maybe for a 64-66, look familiar?

**60-66** · 07-22-2014, 09:19 AM

Quote:

Originally Posted by Jurassic-1

Looking for bracket and wheel well for a factory power steering on a 1964 c-10 We were told there is a hole in the wheel well with a clamp type bracket. I need to locate one. Does anyone have a photo of this unit?

The hole in the inner fender is correct for GMC only. PS hose routing was different.

**Jurassic-1** · 07-22-2014, 10:18 AM

Thanks for the info. Do you know if Chevy had an extra bracket where it went under the fender well? it rubs the hose.

**Jurassic-1** · 07-22-2014, 10:23 AM

Quote:

Originally Posted by t korinek

we just got this piece, its not a 67-72 thinking maybe for a 64-66, look familiar?

Tom , What is left on that system? the 64 box is different from the 67-68 box. Chris is trying to get info for his build but I may be putting power steering on my 66. Thanks. Also Chris still wants fenders and doors for his 65 4x4. Give him a call if you get any nice ones Thanks

**60-66** · 07-22-2014, 10:28 AM

Quote:

Originally Posted by Jurassic-1

Thanks for the info. Do you know if Chevy had an extra bracket where it went under the fender well? it rubs the hose.

Yes, it mounted to the steering box as sigshooter pointed out above. The system pictured here above looks correct for 63-66 but are you doing a half or 3/4 ton ? 3/4 ton center link is different.

**60-66** · 07-22-2014, 06:36 PM

Heres the Chevy bracket, mounts to steering box and passes under the inner fender

Then heres a few on the GMC V6 version.

**Jurassic-1** · 07-22-2014, 07:59 PM

Looks like the V6 GMC Power steering was on the top of the engine so those had the hole through them.Thanks for the photos they show the hoses clearly I think we will have to put a sleeve over the hose. You can see how the fender well left a mark on the hose sleeves. Thanks again for the info.

**GMCNUT** · 07-23-2014, 09:51 AM

Quote:

Originally Posted by t korinek

we just got this piece, its not a 67-72 thinking maybe for a 64-66, look familiar?

Tom are you selling this drag link, control valve and steering box etc? PM me if no one else has dibbs and you want to get rid of it.....thanks!

**t korinek** · 07-23-2014, 10:05 AM

The whole assembly is for sale, the steering box, drag link,brackets etc, everything in the pics Jurassic has first shot at it, if he passes GMCNUT is up $135 + shipping

**Jurassic-1** · 07-23-2014, 11:14 AM

Tom I still have the 3/4 ton 1968 setup . I may try to put it in changing only the brackets. I will pass since I do not want you to have to part a complete one out Gmc Nut can step in but if you get a partial frame bracket set let me know .Thanks

07-19-2014, 06:31 PM	#1
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	WTB Power steering bracket Looking for bracket and wheel well for a factory power steering on a 1964 c-10 We were told there is a hole in the wheel well with a clamp type bracket. I need to locate one. Does anyone have a photo of this unit?

07-22-2014, 01:41 AM	#3
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: WTB Power steering bracket we just got this piece, its not a 67-72 thinking maybe for a 64-66, look familiar? Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-22-2014, 10:18 AM	#5
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Power steering bracket Thanks for the info. Do you know if Chevy had an extra bracket where it went under the fender well? it rubs the hose.

07-22-2014, 06:36 PM	#8
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB Power steering bracket Heres the Chevy bracket, mounts to steering box and passes under the inner fender Then heres a few on the GMC V6 version. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-22-2014, 07:59 PM	#9
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Power steering bracket Looks like the V6 GMC Power steering was on the top of the engine so those had the hole through them.Thanks for the photos they show the hoses clearly I think we will have to put a sleeve over the hose. You can see how the fender well left a mark on the hose sleeves. Thanks again for the info.

07-23-2014, 10:05 AM	#11
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: WTB Power steering bracket The whole assembly is for sale, the steering box, drag link,brackets etc, everything in the pics Jurassic has first shot at it, if he passes GMCNUT is up $135 + shipping __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-23-2014, 11:14 AM	#12
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Power steering bracket Tom I still have the 3/4 ton 1968 setup . I may try to put it in changing only the brackets. I will pass since I do not want you to have to part a complete one out Gmc Nut can step in but if you get a partial frame bracket set let me know .Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.