KY WTB 292 K10 Frame Mount RT Side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 07-06-2014, 06:24 PM

Need a 1964, K10 292 right side frame engine mount, part number is 3822956. It was originally riveted to frame. This 292 K10 frame mount right side is unique to this truck. It was used from 1963 to 1966 in K10 trucks. Believe the rivet holes both top and bottom rows for the 292 mount to be about an inch closer then for other engines. It mounts in the front frame holes.

Thanks,
Les

qksilver · 08-08-2014, 10:35 PM

same here! except for a 67

good luck

66Gilbert · 08-12-2014, 09:53 PM

I know what the K10 V-8 engine mounts look like. What is the difference between the 292 and other 6 cylinder right side engine mounts.

07-06-2014, 06:24 PM	#1
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	WTB 292 K10 Frame Mount RT Side Need a 1964, K10 292 right side frame engine mount, part number is 3822956. It was originally riveted to frame. This 292 K10 frame mount right side is unique to this truck. It was used from 1963 to 1966 in K10 trucks. Believe the rivet holes both top and bottom rows for the 292 mount to be about an inch closer then for other engines. It mounts in the front frame holes. Thanks, Les

08-08-2014, 10:35 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB 292 K10 Frame Mount RT Side same here! except for a 67 good luck

08-12-2014, 09:53 PM	#3
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: WTB 292 K10 Frame Mount RT Side I know what the K10 V-8 engine mounts look like. What is the difference between the 292 and other 6 cylinder right side engine mounts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.