GA Parting out '74 4spd one ton dually - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66Submarine · 06-30-2014, 11:03 PM

Quote:

Originally Posted by TheBlueBomber

Sounds good shoot some closer pictures on Sunday when you get a chance. Thanks.

Started to pull them off and noticed the left one has been beat up where some chucklehead tried to pull the window crank off; you can also see the inner panel is cracked/broken around the door handle. Let me know if you still want them.

79Betty · 07-04-2014, 03:28 PM

66sub little update. New card and all ordered, have access to bank account now. Send me a pm with your PayPal info or however you want paid. If PayPal might take me a bit as it still has my old number. PayPal is convenient sometimes... Other times like setting it up it's a PITA.

66Submarine · 07-05-2014, 03:25 PM

Ok, I'll send you a PM. Paypal is what I've been doing, but a money order or something would also be fine.

Orion88 · 07-08-2014, 09:10 PM

Do you have the hood latch assembly and matching striker assembly?

66Submarine · 07-08-2014, 09:30 PM

Quote:

Originally Posted by Orion88

Do you have the hood latch assembly and matching striker assembly?

Sure do!

**cheyennesuper74** · 08-19-2014, 04:44 PM

Hi, what is the condition of the front bumper? I'm more interested in the impact strips but if the whole assembly is good I could probably use it. The shipping to Michigan would be the main obstacle. Thanks.

66Submarine · 08-21-2014, 09:06 PM

Quote:

Originally Posted by cheyennesuper74

Hi, what is the condition of the front bumper? I'm more interested in the impact strips but if the whole assembly is good I could probably use it. The shipping to Michigan would be the main obstacle. Thanks.

Sorry for the delay; here are some pictures. They have a few scratches/marks and the little nubs on the end are missing on one. Let me know if you have any interest in them.

mister honey · 08-21-2014, 10:33 PM

Is the transmission tunnel/hump still available?

Thanks!

Mike

66Submarine · 08-21-2014, 10:39 PM

Yes, it is still available.

**old Rusty C10** · 08-21-2014, 10:58 PM

I didn't read the whole thread but are the vent things on the left and right kick panels all there I need the whole thing housing, vent, screws, and workings shipped to 07731 in Howell NJ

66Submarine · 08-21-2014, 11:08 PM

Quote:

Originally Posted by old Rusty C10

I didn't read the whole thread but are the vent things on the left and right kick panels all there I need the whole thing housing, vent, screws, and workings shipped to 07731 in Howell NJ

IIRC all that's still there and intact; I'll try to pull it off and check it out tomorrow. Thanks.

bob_o · 08-22-2014, 12:21 AM

Is the fan shroud still available? Thanks!

harveyrc2012 · 08-22-2014, 12:13 PM

Still have grill parts n how much to ship to 23112 thank u,

66Submarine · 08-22-2014, 12:46 PM

Quote:

Originally Posted by bob_o

Is the fan shroud still available? Thanks!

No, that has been sold.

Quote:

Originally Posted by harveyrc2012

Still have grill parts n how much to ship to 23112 thank u,

The grill is also gone (the truck didn't have the factory brackets anyway).

66Submarine · 08-23-2014, 01:03 PM

Quote:

Originally Posted by old Rusty C10

I didn't read the whole thread but are the vent things on the left and right kick panels all there I need the whole thing housing, vent, screws, and workings shipped to 07731 in Howell NJ

Checked and they are there and intact; I'll try to pull them off tomorrow.

66Submarine · 08-25-2014, 02:20 AM

Quote:

Originally Posted by old Rusty C10

I didn't read the whole thread but are the vent things on the left and right kick panels all there I need the whole thing housing, vent, screws, and workings shipped to 07731 in Howell NJ

Here you go. One needs a new foam seal, but I figure that's to be expected from 40-year-old foam parts.

Does $20 + shipping work? I'll get a quote tomorrow after I come up with a box.

**cheyennesuper74** · 08-26-2014, 11:30 AM

Quote:

Originally Posted by 66Submarine

Sorry for the delay; here are some pictures. They have a few scratches/marks and the little nubs on the end are missing on one. Let me know if you have any interest in them.

Thanks for the pics. Trying to think of the best way to rehab the broken clips. Probably do some epoxy and use some screws. What are you looking to get for these? I'm also hunting for some of the Camper Special wheels, 16.5 x 8.25 and 16.5 x 9.75 if you know of any sources.

66Submarine · 08-26-2014, 01:08 PM

Quote:

Originally Posted by cheyennesuper74

Thanks for the pics. Trying to think of the best way to rehab the broken clips. Probably do some epoxy and use some screws. What are you looking to get for these? I'm also hunting for some of the Camper Special wheels, 16.5 x 8.25 and 16.5 x 9.75 if you know of any sources.

Yeah, that was also my thought. $15 + shipping because I think I'll have to make up a homemade box to put them in?

I know a guy that deals with the '73-'87 stuff that might have some extra 16.5" x 8.25"/9.75" wheels around; I'll ask next time I talk to him.

78 chevy · 08-26-2014, 03:37 PM

Could I get some pics of the dash pad

66Submarine · 08-26-2014, 07:10 PM

The dash pad was cracked and torn in several places; not worth shipping it IMO. The covering was peeling off above the cluster, but you can't see it in the picture.

07-04-2014, 03:28 PM	#52
79Betty Registered User Join Date: Jan 2013 Location: Jasper, IN Posts: 948	Re: Parting out '74 4spd one ton dually 66sub little update. New card and all ordered, have access to bank account now. Send me a pm with your PayPal info or however you want paid. If PayPal might take me a bit as it still has my old number. PayPal is convenient sometimes... Other times like setting it up it's a PITA. __________________ When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10

07-05-2014, 03:25 PM	#53
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: Parting out '74 4spd one ton dually Ok, I'll send you a PM. Paypal is what I've been doing, but a money order or something would also be fine. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

07-08-2014, 09:10 PM	#54
Orion88 Registered User Join Date: Feb 2014 Location: Bloomington, IN Posts: 164	Re: Parting out '74 4spd one ton dually Do you have the hood latch assembly and matching striker assembly? __________________ You gotta have fun while you're little!!

08-19-2014, 04:44 PM	#56
cheyennesuper74 New Member Join Date: Aug 2014 Location: Clawson, Mi Posts: 16	Re: Parting out '74 4spd one ton dually Hi, what is the condition of the front bumper? I'm more interested in the impact strips but if the whole assembly is good I could probably use it. The shipping to Michigan would be the main obstacle. Thanks.

08-21-2014, 10:33 PM	#58
mister honey Registered User Join Date: Feb 2004 Location: eastern blowville heights, ohio Posts: 57	Re: Parting out '74 4spd one ton dually Is the transmission tunnel/hump still available? Thanks! Mike

08-21-2014, 10:39 PM	#59
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: Parting out '74 4spd one ton dually Yes, it is still available. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

08-21-2014, 10:58 PM	#60
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Parting out '74 4spd one ton dually I didn't read the whole thread but are the vent things on the left and right kick panels all there I need the whole thing housing, vent, screws, and workings shipped to 07731 in Howell NJ __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-22-2014, 12:21 AM	#62
bob_o Registered User Join Date: Jan 2012 Location: Arizona Bay Posts: 145	Re: Parting out '74 4spd one ton dually Is the fan shroud still available? Thanks! __________________ 1975 GMC Sierra - Electric Funeral 1962 Buick LeSabre - Mr. Krinkle

08-22-2014, 12:13 PM	#63
harveyrc2012 Registered User Join Date: May 2014 Location: richmond va Posts: 3	Re: Parting out '74 4spd one ton dually Still have grill parts n how much to ship to 23112 thank u,

08-26-2014, 03:37 PM	#69
78 chevy Registered User Join Date: Aug 2014 Location: la grange Posts: 3	Re: Parting out '74 4spd one ton dually Could I get some pics of the dash pad

08-26-2014, 07:10 PM	#70
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: Parting out '74 4spd one ton dually The dash pad was cracked and torn in several places; not worth shipping it IMO. The covering was peeling off above the cluster, but you can't see it in the picture. Attached Images __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.