Taillight harness routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jimal · 09-21-2014, 09:13 AM

I've got the end of the chassis harness, the rear harness on the way, a bed going together, and taillights and a license plate light. How is all of this supposed to be routed under the back of the bed?

donthekawguy · 09-21-2014, 09:30 AM

The wires for the right tail light are longer so they can get over to the right housing and the rest can go down the left side of the frame. If that makes sense. You can attach it anyway you want to the frame. I used zip ties and made sure it was all tucked up in the frame so it wouldn't fall down.

pimpston65 · 09-21-2014, 10:29 AM

Quote:

Originally Posted by Jimal

I've got the end of the chassis harness, the rear harness on the way, a bed going together, and taillights and a license plate light. How is all of this supposed to be routed under the back of the bed?

my bed has clips on the inside of the tailgate cross sill to tuck the wires away

**PGSigns** · 09-21-2014, 10:30 AM

Are all those block welded to the frame? They will need to come off for you stock cross supports to sit where they should. That tank also looks like it may be mounted a little to high to work with your new bed. Set your cross supports where they go on the frame and give it a check.
Jimmy

pimpston65 · 09-21-2014, 10:38 AM

Quote:

Originally Posted by pimpston65

my bed has clips on the inside of the tailgate cross sill to tuck the wires away

there are 2

earl84 · 09-21-2014, 11:43 AM

No pic, but my 66 fleetside has 5 factory clips across that rear crossmember. Routed from the front all the way down inside the left framerail, and secured with insulated cable clamps. I bought a whole set of them, very inexpensive, at Harbor Freight. Took the time to drill the holes to be sure it stayed in place. PITA, but worth it in the end.

Jimal · 09-21-2014, 12:45 PM

Quote:

Originally Posted by PGSigns

Are all those block welded to the frame? They will need to come off for you stock cross supports to sit where they should. That tank also looks like it may be mounted a little to high to work with your new bed. Set your cross supports where they go on the frame and give it a check.
Jimmy

That's an old picture, but the best one I had of the harness. Those blocks have been cut off already.

09-21-2014, 09:13 AM	#1
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	Taillight harness routing I've got the end of the chassis harness, the rear harness on the way, a bed going together, and taillights and a license plate light. How is all of this supposed to be routed under the back of the bed?

09-21-2014, 09:30 AM	#2
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,129	Re: Taillight harness routing The wires for the right tail light are longer so they can get over to the right housing and the rest can go down the left side of the frame. If that makes sense. You can attach it anyway you want to the frame. I used zip ties and made sure it was all tucked up in the frame so it wouldn't fall down. __________________ 66 shorty Last edited by donthekawguy; 09-21-2014 at 09:37 AM.

09-21-2014, 10:30 AM	#4
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Taillight harness routing Are all those block welded to the frame? They will need to come off for you stock cross supports to sit where they should. That tank also looks like it may be mounted a little to high to work with your new bed. Set your cross supports where they go on the frame and give it a check. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-21-2014, 11:43 AM	#6
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: Taillight harness routing No pic, but my 66 fleetside has 5 factory clips across that rear crossmember. Routed from the front all the way down inside the left framerail, and secured with insulated cable clamps. I bought a whole set of them, very inexpensive, at Harbor Freight. Took the time to drill the holes to be sure it stayed in place. PITA, but worth it in the end.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.