Wanted 15x14 wheel cheap!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 10-04-2003, 11:03 AM

I am looking for (1) 15 x 14 wheel with a 5x5 bolt pattern. Wheel does not have to be in great shape. It just needs to hold air and not be bent up. I am needing it to mount a tire and fiqure backspacing for my project. Thanks!!

phantom dually · 10-05-2003, 12:15 PM

ttt

phantom dually · 10-07-2003, 09:04 PM

TTT

phantom dually · 10-10-2003, 08:34 PM

TTT

SCOTI · 10-10-2003, 08:43 PM

Phantom, when I bought my 15x14's from a place called ralley america many years ago, they shipped one wheel to me w/the center just pressed into place & not welded. You might try & contact whatever wheel co your thinking of going w/& see if they offer a similar service. It was worth the small extra fees + shipping because I could adjust the b.space exactly where I wanted + ensure everything fit..... then I shipped it back w/the proper b.spacing, they trued it & welded it in then did another to match.

Might be worth inquiring.

phantom dually · 10-10-2003, 09:41 PM

I know that Colorado customs does do this but I am going with billet specialties mainly because they are priced alot better. I will contact them to see whats up and if they will do this for me. Thanks

phantom dually · 10-10-2003, 09:41 PM

I know that Colorado customs does do this but I am going with billet specialties mainly because they are priced alot better. I will contact them to see whats up and if they will do this for me. Thanks

**N2TRUX** · 10-11-2003, 12:32 AM

Quote:

Originally posted by phantom dually
.....I am going with billet specialties mainly because they are priced alot better. I will contact them to see whats up and if they will do this for me. Thanks

GOOD LUCK!!!! Those freaking idiots screwed up on my wheels, and admitted they were wrong. But guess what? Since the shop had already mounted them, they refused to do anything about it.

You might see them doing that to some po-dunk tire shop, but these came from Discount Tire. You know them don't ya? They are the ones that order "thousands" of dollars worth of wheels from Billet Specialties each year.

Too bad, so sad, but you mounted them, so we don't have to fix our f-up...

phantom dually · 10-11-2003, 11:25 AM

That sux azz!! So what did they screw up??

**N2TRUX** · 10-12-2003, 12:39 AM

When we made the order, it was for 3 sets of wheels. On two sets, we wanted the valve stem holes drilled to the inside. The store manager called the order, then faxed all the details, then called to verify that they understood exactly what we wanted.

When they arrived, the store manager forgot that 2 of the sets were supposed to be drilled on the inside, and mounted all of them up. When he delivered them to the shop where my truck was at, it was discovered they were wrong.

He called Billet Specialties, and they told him they would build another set, and he could ship the old set back, since it was Billet Specialties mistake, and he had the order documented.

When they found out he had mounted them already, they changed their tune, and refused to make good. The store manager had another set made for me. He is had to sell the other set at cost, just to get them off his books....

phantom dually · 10-12-2003, 11:21 AM

That really bites. I am glad you posted about this though because when I run the 15x14 in the rear the valve stem will have to be on the outside to miss the disc.

Jessechop · 10-12-2003, 12:57 PM

I have a 15x12, yea I know you need a 14 but hey its here and its cheap!!!

phantom dually · 10-13-2003, 05:44 PM

Thanks for the offer man but I really need a 14 or 15.

phantom dually · 01-19-2004, 12:00 AM

TTT

10-04-2003, 11:03 AM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Wanted 15x14 wheel cheap!!!!!! I am looking for (1) 15 x 14 wheel with a 5x5 bolt pattern. Wheel does not have to be in great shape. It just needs to hold air and not be bent up. I am needing it to mount a tire and fiqure backspacing for my project. Thanks!!

10-05-2003, 12:15 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-07-2003, 09:04 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-10-2003, 08:34 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-10-2003, 08:43 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Phantom, when I bought my 15x14's from a place called ralley america many years ago, they shipped one wheel to me w/the center just pressed into place & not welded. You might try & contact whatever wheel co your thinking of going w/& see if they offer a similar service. It was worth the small extra fees + shipping because I could adjust the b.space exactly where I wanted + ensure everything fit..... then I shipped it back w/the proper b.spacing, they trued it & welded it in then did another to match. Might be worth inquiring. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-10-2003, 09:41 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I know that Colorado customs does do this but I am going with billet specialties mainly because they are priced alot better. I will contact them to see whats up and if they will do this for me. Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-11-2003, 11:25 AM	#9
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	That sux azz!! So what did they screw up?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-12-2003, 12:39 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	When we made the order, it was for 3 sets of wheels. On two sets, we wanted the valve stem holes drilled to the inside. The store manager called the order, then faxed all the details, then called to verify that they understood exactly what we wanted. When they arrived, the store manager forgot that 2 of the sets were supposed to be drilled on the inside, and mounted all of them up. When he delivered them to the shop where my truck was at, it was discovered they were wrong. He called Billet Specialties, and they told him they would build another set, and he could ship the old set back, since it was Billet Specialties mistake, and he had the order documented. When they found out he had mounted them already, they changed their tune, and refused to make good. The store manager had another set made for me. He is had to sell the other set at cost, just to get them off his books....

10-12-2003, 11:21 AM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	That really bites. I am glad you posted about this though because when I run the 15x14 in the rear the valve stem will have to be on the outside to miss the disc. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-12-2003, 12:57 PM	#12
Jessechop Registered User Join Date: Sep 2003 Location: maine Posts: 191	I have a 15x12, yea I know you need a 14 but hey its here and its cheap!!!

10-13-2003, 05:44 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Thanks for the offer man but I really need a 14 or 15. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-19-2004, 12:00 AM	#14
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.