The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board > 1969 - 1972 Blazers and Jimmys Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-19-2013, 09:50 AM   #1
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
70 Jimmy Custom

I have been looking for a project to work on for quite sometime. Happen to stumble across this old beast. Originally I was looking for something to use in the backcountry for serving with two local search and rescue groups. HOWEVER, now that I am starting to take everything out and find that there are only a couple of spots that are rusted, I am beginning to re-evaluate things.

This Jimmy has everything I was hoping to find installed from the factory. It has the AC, 3.73 gears with lockers. Comes with both tops, half and full. Both are double wall tops and are in decent shape. The full top has a small hole in it, which is a bit concerning, but is only about the size of a quarter. One nice thing that I like is that it has the dual battery and power steering and brakes (so the wife will be more comfortable to drive). Have to keep the wife happy during the rebuild.

The absolute best part about this project; As it sits in my driveway as of today, the only money that I have put into it, is the fuel to go get it, 30 miles round trip.
Brattt88 is offline   Reply With Quote
Old 09-19-2013, 10:11 AM   #2
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom









Brattt88 is offline   Reply With Quote
Old 09-19-2013, 10:16 AM   #3
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

Brattt88 is offline   Reply With Quote
Old 09-19-2013, 11:56 AM   #4
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

Some pics of the Jimmy
Attached Images
 
Brattt88 is offline   Reply With Quote
Old 09-19-2013, 11:57 AM   #5
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

More
Attached Images
  
Brattt88 is offline   Reply With Quote
Old 09-19-2013, 11:59 AM   #6
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

and that was all
Attached Images
  
Brattt88 is offline   Reply With Quote
Old 09-19-2013, 01:55 PM   #7
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,762
Re: 70 Jimmy Custom

Very nice, great price....now you have some work to do! What company made your half top

Welcome aboard
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 09-19-2013, 02:13 PM   #8
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

The half top was made by Glasstite. It is not the best fit. I am not sure if I will keep it with the truck or not. As it sits right now, I am still in the process of emptying everything out.
Brattt88 is offline   Reply With Quote
Old 09-19-2013, 11:54 PM   #9
Slinger60
Registered User
 
Slinger60's Avatar
 
Join Date: Jul 2011
Location: Redding Ca.
Posts: 207
Re: 70 Jimmy Custom

Nice find. Looks to be in pretty good shape. And welcome.
__________________
1969 C10 LWB GMC.
1970 K5 Blazer
1971 K10 Burb
Build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=529970

Shawn
Slinger60 is offline   Reply With Quote
Old 10-29-2013, 10:49 PM   #10
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

So, I have finally gotten everything cleaned out and thrown away. Got to inspect alot of the pans and so forth. Looks like the passenger side will get new door jams and a floor pan. Both doors are rusted through underneathe.

Having a tough decision to make. I have thought about having this painted with the bedliner material. Part of me things that this might not be a good thing to do because once the stuff is on, it cannot just be sanded off and start over. Has anyone done this and what was the result? Are you happy or dissatisfied?
Brattt88 is offline   Reply With Quote
Old 10-29-2013, 11:54 PM   #11
Maximus
Registered User
 
Maximus's Avatar
 
Join Date: Feb 2011
Location: Santa Rosa, CA
Posts: 672
Re: 70 Jimmy Custom

I wouldn't "bed liner" it, not only is it a permanent decision that you may grow tired of, but it also looks like you have a fairly strait body that wouldn't take much to be presentable.
Its your truck, and obviously do whatever you want to do, but if looking for opinions, every rhinolined exterior iI have seen makes the truck look cheap.

If you plan on plowing through backwoods and expect a large amount of brush scratches with the truck though, it may be worth it for you application.

That aside,
Truck looks awesome, the half-top is pretty sweet, and even sweeter knowing it came with a full top as well.
Also, welcome to the forum!

More pics of it out of the backwoods and all hosed down?
Maximus is offline   Reply With Quote
Old 10-30-2013, 10:07 AM   #12
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
Re: 70 Jimmy Custom

[QUOTE=
Having a tough decision to make. I have thought about having this painted with the bedliner material.

Ohhhh.... please dont do that to a Cheyanne optioned Jimmy.

Just my thought, its yours.
Tom Vogel is offline   Reply With Quote
Old 10-30-2013, 12:47 PM   #13
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

Thanks guys for the input.
Brattt88 is offline   Reply With Quote
Old 10-30-2013, 12:57 PM   #14
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

[IMG]http://[/IMG]

Haven't had much of a chance to do much cleaning. But this is what I have done so far.
Brattt88 is offline   Reply With Quote
Old 10-31-2013, 08:47 PM   #15
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
Re: 70 Jimmy Custom

Quote:
Originally Posted by Brattt88 View Post
The half top was made by Glasstite. It is not the best fit. I am not sure if I will keep it with the truck or not. As it sits right now, I am still in the process of emptying everything out.
You could sure sell it on here.
Tom Vogel is offline   Reply With Quote
Old 07-21-2014, 03:01 PM   #16
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

Brattt88 is offline   Reply With Quote
Old 09-30-2014, 05:43 PM   #17
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

Spent some time tearing things down and talking with some about paint and trying to decide exactly how I wanted to have this project look. After some long nights trying to figure this out, I brought in an "expert". He pulled out a rag and asked for some polishing compound. After a nice little buffing in a hidden area, it was discovered the paint was in decent shape. Since I was looking at keeping it orange, it would be pretty cool to keep the color as original as possible.... What do you think so far?
[/IMG]

Brattt88 is offline   Reply With Quote
Old 09-30-2014, 05:44 PM   #18
Brattt88
Registered User
 
Join Date: Sep 2013
Location: Athol, Idaho
Posts: 13
Re: 70 Jimmy Custom

[IMG][/IMG]
Brattt88 is offline   Reply With Quote
Old 10-25-2014, 09:57 PM   #19
71cheynne402
Registered User
 
Join Date: Dec 2012
Location: Wichita ks
Posts: 146
Re: 70 Jimmy Custom

Looks fantastic!!!!
__________________
71 Cheyenne 72 k5 71 jimmy 72 k10
71cheynne402 is offline   Reply With Quote
Old 10-31-2014, 08:19 AM   #20
Splash4195
Registered User
 
Join Date: Jan 2010
Location: Minnesota
Posts: 341
Re: 70 Jimmy Custom

Wow nice project!
Splash4195 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com