Argh, if this doesn't make a guy feel dumb... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 01-23-2004, 03:50 PM

How do you get wiper blades off? LOL I don't wanna break anything becuase it is rather cold outside and everything is brittle. I was complaining about my stock blades being too small, and when I got out to my truck this morning, there was a brand new set of Teflon wiper blades sitting on my seat

My dad rocks!

8t5Silverado · 01-23-2004, 03:52 PM

Just hold the main arm and pull hard.

I think there is a small piece of spring steel in there. Just push it in with a screwdriver while you pull on the blade.

Russell · 01-23-2004, 04:04 PM

Oh, thats easy, thanks

Four more hours till I can finally get the bobcat fired up, woohoo! (stupid cold diesel engine with a truck block heater and no glowplugs....) We got like two feet of snow overnight, and my brother's car is plowing snow already, lol

I'll go get a fire going in the mech shop to warm things up a bit, I've got a couple things I wanna do while I am out there

01-23-2004, 03:50 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Argh, if this doesn't make a guy feel dumb... How do you get wiper blades off? LOL I don't wanna break anything becuase it is rather cold outside and everything is brittle. I was complaining about my stock blades being too small, and when I got out to my truck this morning, there was a brand new set of Teflon wiper blades sitting on my seat My dad rocks! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-23-2004, 03:52 PM	#2
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Just hold the main arm and pull hard. I think there is a small piece of spring steel in there. Just push it in with a screwdriver while you pull on the blade. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

01-23-2004, 04:04 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Oh, thats easy, thanks Four more hours till I can finally get the bobcat fired up, woohoo! (stupid cold diesel engine with a truck block heater and no glowplugs....) We got like two feet of snow overnight, and my brother's car is plowing snow already, lol I'll go get a fire going in the mech shop to warm things up a bit, I've got a couple things I wanna do while I am out there __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.