11-14-2014, 10:44 AM | #1 |
Registered User
Join Date: Aug 2014
Location: Zeeland MI
Posts: 6
|
Newbie K5 rebuild
SO just picked up this 72 K5.Currently has 33x12.50x15 BFG. Not sure if it is lifted or not. I am thinking it must be lifted a bit to fit the 33's Going to do a complete restore. Trying to decide on 33x12.5 tires or 35x12.5 tires. Can I do 33's with a 2" lift? Does anyone have photos of their truck with 2" lift or 4" lift. I can find lots of photos with 6" lift. Thinking 6" is to high. I tend to like the lower look with tires filling up the wheel well. Thinkin BFG radial T/A tires. Truck will be 80% street and 20% sand. No rocks or mud. Please give this newbie some advice
|
11-14-2014, 10:48 AM | #2 |
Registered User
Join Date: Oct 2014
Location: somewhere . . .
Posts: 973
|
Re: Newbie K5 rebuild
welcome to the show ....
__________________
dont want to hear excuses, i want to hear solution(s) |
11-14-2014, 11:33 AM | #3 |
Boosted Member
Join Date: May 2002
Location: Mackinaw, IL
Posts: 2,200
|
Re: Newbie K5 rebuild
Not a blazer, but here's my K-10 on 33's and a 4" Skyjacker lift.
__________________
1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards TURBO ALL THE THINGS!! |
11-14-2014, 03:31 PM | #4 |
Registered User
Join Date: Dec 2003
Location: West Michigan
Posts: 447
|
Re: Newbie K5 rebuild
Not my Blazer & not the greatest pic but this Blazer is running 4" Deaver springs & 33x12.5 tires.
__________________
1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe |
11-14-2014, 04:22 PM | #5 |
Registered User
Join Date: Aug 2014
Location: Zeeland MI
Posts: 6
|
Re: Newbie K5 rebuild
Thanks that all helps
|
11-14-2014, 10:33 PM | #6 |
Registered User
Join Date: Aug 2014
Location: Zeeland MI
Posts: 6
|
Re: Newbie K5 rebuild
Anybody have a truck with 4" lift and 35" tires
|
11-18-2014, 03:16 PM | #7 |
Registered User
Join Date: Apr 2007
Location: Acworth, GA
Posts: 441
|
Re: Newbie K5 rebuild
This is a 4" lift running 33s
2nd pic is a 6" lift. |
11-18-2014, 09:20 PM | #8 |
Registered User
Join Date: May 2007
Location: Marion, Mi.
Posts: 2,429
|
Re: Newbie K5 rebuild
Ran a 4" Trailmaster lift with 35" BFG Mud Terrains, and loved it for a long time. Did have to do some fender trimming though. Had to go bigger or it might still be my daily driver! Was far more useable all around with the 4" lift. I am not looking back now, with the 1 ton conversion and all!
|
11-23-2014, 10:46 PM | #9 |
Registered User
Join Date: Nov 2012
Location: Freeland, Michigan
Posts: 1,385
|
Re: Newbie K5 rebuild
You found a very solid and COMPLETE truck! I went to millington and looked at that truck this past summer. I couldn't convince my wife that we needed a blazer with our jimmy! That truck had all the hard to find pieces with it! Nice score!
I have posted picks of my current project. It has a 4" BDS Lift with 33"x12.5" Nitto Mud Grappler tires. I have no tire rubbing issues. It sits more than high enough for my 5'3" wife and two little kids to get in and out of!! Good luck with the truck Eric Last edited by 1972 Jimmy; 11-24-2014 at 09:21 PM. |
11-24-2014, 08:22 PM | #10 |
Registered User
Join Date: Nov 2010
Location: Marion, IL
Posts: 719
|
Re: Newbie K5 rebuild
Here is my new ride. I was told it has a 4" lift, I know it has 35" Mickey Thompson Baka claw radials. After looking at 1972 Jimmy's ride I don't think my lift is as big as his. 1972 jimmy, can you measure from the ground the the bottom edge of the highest point of your front and rear wheel well and compare with what I have?
__________________
1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71 |
11-24-2014, 08:59 PM | #11 |
Registered User
Join Date: Mar 2011
Location: Havertown Pa
Posts: 392
|
Re: Newbie K5 rebuild
Here's mine with 33x12.5x16.5 and a 2.5" lift. I have a Dana 60 in front and a 14 bolt rear. With the larger axle tube I get a little more lift.
.
__________________
72 CST 4x4 Blazer, 1 ton 70 SS Chevelle, L78, 396 Everytime someone calls your Blazer a Bronco, God kills a kitten. |
Bookmarks |
|
|