Factory bench Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 01-23-2004, 03:28 AM

The rigid wire that connects the two sides of the mounting brackets has been taken off.

I want to put it back on, I think I remember that it went through some hog rings, is that true? If so how many?

The wire is too long if it doesn't.

I know that I don't need it if I don't want to adjust the seat, and Iprobably won't adjust it, I would just like it back on.

Photos?

gonebad2 · 01-23-2004, 04:03 AM

That sounds right. The hog ring was used to keep the wire up and out of the way.

**GMCPaul** · 01-23-2004, 04:15 AM

Actually there should be a small metal loop attached to the bottom of the seat springs midway across the bottom of the seat that it slides through before connecting on either side.
GMCPaul

WB72 · 01-23-2004, 10:44 PM

Does it go through just one hog ring?

Alex Hayley · 01-24-2004, 12:06 AM

Mine goes through only one hog ring...if it still has too much slack to adjust the seat back and forth, put it through another hog ring.

01-23-2004, 03:28 AM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Factory bench Question The rigid wire that connects the two sides of the mounting brackets has been taken off. I want to put it back on, I think I remember that it went through some hog rings, is that true? If so how many? The wire is too long if it doesn't. I know that I don't need it if I don't want to adjust the seat, and Iprobably won't adjust it, I would just like it back on. Photos? __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

01-23-2004, 04:03 AM	#2
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	That sounds right. The hog ring was used to keep the wire up and out of the way. __________________ Your Bought And Sold....I Got Your Soul!

01-23-2004, 04:15 AM	#3
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,722	Actually there should be a small metal loop attached to the bottom of the seat springs midway across the bottom of the seat that it slides through before connecting on either side. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

01-23-2004, 10:44 PM	#4
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Does it go through just one hog ring? __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

01-24-2004, 12:06 AM	#5
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Mine goes through only one hog ring...if it still has too much slack to adjust the seat back and forth, put it through another hog ring.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.