Airbags with a straight axle - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1project2many · 12-19-2014, 02:02 PM

Quote:

before poly joints the old school trick was to drive 16d finish nails into the rubber bushings to stiffen them up!

I have never heard that. Thank you.

OrrieG · 12-19-2014, 02:27 PM

I have a binder of late 60's and 70's Hot Rod and Car Craft tech and how to articles on stuff like that. Also has all the "good" part numbers for assembling the best components from factory sources. I have been thinking a few projects ahead and might want to make a clone of the 57 210 Sedan I had in 69-70 using the old school rodding tips.

12-19-2014, 02:27 PM	#27
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Airbags with a straight axle I have a binder of late 60's and 70's Hot Rod and Car Craft tech and how to articles on stuff like that. Also has all the "good" part numbers for assembling the best components from factory sources. I have been thinking a few projects ahead and might want to make a clone of the 57 210 Sedan I had in 69-70 using the old school rodding tips. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.