KS Parts for Sale

[makamer]

First person to say "I'll take it" get the part.

I have the following for sale:

Original rochester carb for a 1972 C10 Big Block motor, number 7042218. It needs rebuilt. $75

I also have a couple 7042210 carbs that need rebuilding. $40 each.

New Moog front and rear coil springs for a 1972 C10 brand new in box. These are over $80 new per pair. I'll take $50 per pair.

All prices do not include shipping. If you want the parts I'll do my best to ship them as cheap as I can and get to you safely.

[72bowtiestepper]

Do you have the moog part# available on the front & rear coil springs ?
Stock height or lowered ?

[makamer]

They are stock height. I'll have to get the part #s later.

[70STOVEBOLT]

Second in line...

[72bowtiestepper]

Moog part #,s on front & rear coil springs ??
Thanks

[makamer]

OK the Moog part numbers are CC603 and 6104.

I also found a new Spectra Premium Big Block oil pan in the box. Part # GMP27A. Has a very small dent. $65

[72bowtiestepper]

If you are willing to separate, I am interested in the CC603 rear pair of Moog springs.
Would you take $60 shipped to 07838 ?

[makamer]

I don't mind selling just one set but I need to charge the actual shipping. These are heavy. The best I can do is $50 plus shipping.

[makamer]

I received an email from 70STOVEBOLT saying you wanted the front springs but I don't see the post saying that. Do you want them?


Approximately $25 shipping to 46562.

[70STOVEBOLT]

I posted that I wanted them, then realized that they are 3/4 ton springs, so I deleted the post. I need 1/2 ton springs. Sorry for the confusion. Good luck with your sale.

[makamer]

These should have been for 1/2 ton which is what I purchased them for. However, I'll let you be the judge.

[72bowtiestepper]

Originally Posted by makamer

I don't mind selling just one set but I need to charge the actual shipping. These are heavy. The best I can do is $50 plus shipping.

My offer stands at $60 shipped to 07838.....let me know. Thanks

[makamer]

Anyone for these parts? I can't ship the springs so cheaply but would be willing to take offers on the rest.

[makamer]

ttt

[70STOVEBOLT]

Per Federal Mogul website, the 6104 springs are a HD replacement for stock springs on C20 with 250 292 307 350 engines. The CC603 will fit C10 C20 C30 with 250 292 307 350 engines. I could not find a listing for big block engines on their site. That being said, I do not know if 3/4 or 1-ton springs will work on a C10. I am going from a 250 to a 402 and would buy the front springs if I knew they would work without modification.

[makamer]

ttt

[michael bustamante]

I remember reading on here somewhere that stock 1/2 tons used 3/4 ton front springs when equipped with a v8. I dont know if thats for sure or not but its worth researching

[makamer]

I'm not sure. I know I did a lot of research to get the correct springs for my 1/2 ton with big block but hey I could have made a mistake. Hopefully someone will want them.

[carrtrkk]

Greetings
did you sell carb 7042218?