Door question? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Duvall · 12-28-2014, 07:56 PM

I posted this in paint and body with no replies. Will doors from a 1978 blazer fit on a 1974 pickup? Found some nice doors but they are on a blazer. Any response is appreciated.

80SPORT · 12-28-2014, 08:05 PM

yes ...no problem

door trim on inside is different...just keep the 78 trim

UKNOWME · 12-28-2014, 08:06 PM

Shells are the same 73-87

Duvall · 12-28-2014, 11:39 PM

Thank you for the information.
Unknown, aren't truck door from 73-80 the same and the 81 to 87 different?
Well now that I know the blazer doors will fit I will pick them up. I have tried to post Picts but it won't let me browse for them. Thanks again!

UKNOWME · 12-29-2014, 12:23 AM

Well I was wrong. Not sure what the difference is but according to LMC, Brothers, and Classic industries the door shells from 73-76 are one part# and from 77-87 are another part#.

**hatzie** · 12-29-2014, 12:32 AM

The 73-76 use a smaller interior panel and window mechanism. No OEM PW or PDL in the 73-76.
The 77+ doors will bolt up and look fine. Just be aware that you can't use your 1974 interior plastic door trim panel.
Pickups and Forward Suburban doors are the same... Blazers are a little funky. Not sure which ones but some have a full side window surround and some don't...

andrewmp6 · 12-29-2014, 09:20 AM

73-75 had the full removable top then in 76 they went to the half cab type which used the normal doors.

Duvall · 12-29-2014, 11:32 PM

Again, theanks for the replies. Doors will be picked up this week. Oh and they are electric windows and locks. Hopefully the wire harness is still there. Does anybody know if that is hard to trace and remove?

**hatzie** · 12-30-2014, 01:19 AM

Quote:

Originally Posted by Duvall

Again, theanks for the replies. Doors will be picked up this week. Oh and they are electric windows and locks. Hopefully the wire harness is still there. Does anybody know if that is hard to trace and remove?

It doesn't have disconnects at the cab connection. PW & PDL harness is actually a sub-harness so it's not wrapped into the cab harness. It can be removed from the doors and cab without destroying the cab harness.
The rubber door-to-cab harness protectors are riveted in place so they can be a challenge to remove without pulling the doors. These are not re-popped AFAIK.

Duvall · 12-30-2014, 01:09 PM

Good deal, so the outer dimension of the doors from 73-80 are the same. The difference being the inside panel and trim, in either PDL/PW. The doors I am looking at are complete. Thanks on the info for the wire harness I will take that also and now the old 74 will have a little modern tech! LOL
Great help, Thanks guys.
Todd

Duvall · 12-30-2014, 01:11 PM

Oh yeah, I did see someone on this forum was selling the wiring harness for about 250 but could not find it again. Seemed a little steep to me.

**hatzie** · 12-30-2014, 07:46 PM

Quote:

Originally Posted by Duvall

Oh yeah, I did see someone on this forum was selling the wiring harness for about 250 but could not find it again. Seemed a little steep to me.

You get what you pay for. You're paying for modern crosslink polyethylene jacketed wire rather than 40 year old crunchy PVC and new connectors rather than old ones. GM would be way more if they were available.

12-28-2014, 07:56 PM	#1
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Door question? I posted this in paint and body with no replies. Will doors from a 1978 blazer fit on a 1974 pickup? Found some nice doors but they are on a blazer. Any response is appreciated.

12-28-2014, 08:05 PM	#2
80SPORT Registered User Join Date: Mar 2008 Location: red deer alberta Posts: 777	Re: Door question? yes ...no problem door trim on inside is different...just keep the 78 trim

12-28-2014, 08:06 PM	#3
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Door question? Shells are the same 73-87 __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

12-28-2014, 11:39 PM	#4
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: Door question? Thank you for the information. Unknown, aren't truck door from 73-80 the same and the 81 to 87 different? Well now that I know the blazer doors will fit I will pick them up. I have tried to post Picts but it won't let me browse for them. Thanks again!

12-29-2014, 12:23 AM	#5
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Door question? Well I was wrong. Not sure what the difference is but according to LMC, Brothers, and Classic industries the door shells from 73-76 are one part# and from 77-87 are another part#. __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

12-29-2014, 12:32 AM	#6
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: Door question? The 73-76 use a smaller interior panel and window mechanism. No OEM PW or PDL in the 73-76. The 77+ doors will bolt up and look fine. Just be aware that you can't use your 1974 interior plastic door trim panel. Pickups and Forward Suburban doors are the same... Blazers are a little funky. Not sure which ones but some have a full side window surround and some don't... __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

12-29-2014, 09:20 AM	#7
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Door question? 73-75 had the full removable top then in 76 they went to the half cab type which used the normal doors.

12-29-2014, 11:32 PM	#8
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: Door question? Again, theanks for the replies. Doors will be picked up this week. Oh and they are electric windows and locks. Hopefully the wire harness is still there. Does anybody know if that is hard to trace and remove?

12-30-2014, 01:09 PM	#10
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: Door question? Good deal, so the outer dimension of the doors from 73-80 are the same. The difference being the inside panel and trim, in either PDL/PW. The doors I am looking at are complete. Thanks on the info for the wire harness I will take that also and now the old 74 will have a little modern tech! LOL Great help, Thanks guys. Todd

12-30-2014, 01:11 PM	#11
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: Door question? Oh yeah, I did see someone on this forum was selling the wiring harness for about 250 but could not find it again. Seemed a little steep to me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.