Inside the Doors. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mjminino · 01-08-2015, 06:47 AM

What are y'all using to protect the inside of your doors? I'm about to redo the lower half of the doors. While I have it accessible I was thinking about using por-15 to about an inch above the opening on the door and and about an inch on the repair panels. Then when I'm about to weld everything together use weld through primer for those last 2 inches thatvare bare... Thoughts/opinions?

62 Barnfind · 01-08-2015, 10:22 AM

I blasted mine, sprayed rustoleum rusty metal primer and semi gloss black to thew inside. Then I put the outer skin on. I figured I didn't have to go to expensive because it didn't have it before. So now it has some protection.

65 C20 · 01-08-2015, 01:15 PM

After you treat the metal with what ever you chose some people like to add some sound deadner while they are at it.

cg285 · 01-08-2015, 01:23 PM

body schutz

65 C20 · 01-08-2015, 03:13 PM

Quote:

Originally Posted by cg285

body schutz

I just goggled body schutz by 3M.
That looks like a good product that will seal and sound deaden all in one.

Mjminino · 01-08-2015, 04:28 PM

Wow! They're mighty proud of their Applicator gun! 90$!!!

65 C20 · 01-09-2015, 01:38 PM

Check 3M 08964
Comes in an aerosol can also.
I haven't tried it but if you are only doing 2 doors should be enough.

01-08-2015, 06:47 AM	#1
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Inside the Doors. What are y'all using to protect the inside of your doors? I'm about to redo the lower half of the doors. While I have it accessible I was thinking about using por-15 to about an inch above the opening on the door and and about an inch on the repair panels. Then when I'm about to weld everything together use weld through primer for those last 2 inches thatvare bare... Thoughts/opinions?

01-08-2015, 10:22 AM	#2
62 Barnfind Registered User Join Date: Jan 2012 Location: Salado, Tx Posts: 1,374	Re: Inside the Doors. I blasted mine, sprayed rustoleum rusty metal primer and semi gloss black to thew inside. Then I put the outer skin on. I figured I didn't have to go to expensive because it didn't have it before. So now it has some protection. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

01-08-2015, 01:15 PM	#3
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: Inside the Doors. After you treat the metal with what ever you chose some people like to add some sound deadner while they are at it.

01-08-2015, 01:23 PM	#4
cg285 Registered User Join Date: Aug 2013 Location: sumterville, florida Posts: 914	Re: Inside the Doors. body schutz

01-08-2015, 04:28 PM	#6
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: Inside the Doors. Wow! They're mighty proud of their Applicator gun! 90$!!!

01-09-2015, 01:38 PM	#7
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: Inside the Doors. Check 3M 08964 Comes in an aerosol can also. I haven't tried it but if you are only doing 2 doors should be enough.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.