The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-01-2015, 09:51 PM   #1
redsled87
Registered User
 
redsled87's Avatar
 
Join Date: Dec 2011
Location: Lanc Co PA
Posts: 226
Stepside bed inner wheel tubs

Has anyone added fleetside wheeltubs to their step side? Mine sits fairly low. I was going to go the whole way into the frame rail in case I want to go bigger in the future. I'm running a 325/50/15 drag radial on a 10" wheel. I've got about 1-2" of gap to the wheel opening from the tire. I'm looking at running a wider 30-31" tall Hoosier Quick Time Pro tire. Can't hurt to have more tire with a torquey big block! Just wondering if I'll be fine with factory tubs or I need aftermarket ones. This is on an '87 by the way. Thanks
__________________
1987 R10 Pump Gas 496/TH375
Best 1/4 pass to date
60' 1.49
1/4 10.93
MPH 120
redsled87 is offline   Reply With Quote
Old 01-01-2015, 10:38 PM   #2
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: Stepside bed inner wheel tubs

http://67-72chevytrucks.com/vboard/s...d.php?t=611423
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Old 01-08-2015, 12:12 AM   #3
kpeztruck
Registered User
 
kpeztruck's Avatar
 
Join Date: Sep 2010
Location: Canton, GA
Posts: 229
Re: Stepside bed inner wheel tubs

I used the fleetside inner fenders on mine. I cut some width out of mine to clear roll cage, etc. I have had as large as an 30.5x10.5w under mine with it sitting low. Never had an issue with tire clearance.
kpeztruck is offline   Reply With Quote
Old 01-14-2015, 11:05 AM   #4
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Stepside bed inner wheel tubs

I had an '84 stepside that was tubbed using the fleetside inner fenders. The PO that did the work jused the inners as is without modification. The inside of the "tubs" where actually past the frame rail. I did not keep the truck long enought to change that, but if I had, I would have narrowed the tubs to keep the inside flush with the outside of the frame rail.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 01-14-2015, 01:34 PM   #5
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Stepside bed inner wheel tubs

Quote:
Originally Posted by redsled87 View Post
Has anyone added fleetside wheeltubs to their step side? Mine sits fairly low. I was going to go the whole way into the frame rail in case I want to go bigger in the future. I'm running a 325/50/15 drag radial on a 10" wheel. I've got about 1-2" of gap to the wheel opening from the tire. I'm looking at running a wider 30-31" tall Hoosier Quick Time Pro tire. Can't hurt to have more tire with a torquey big block! Just wondering if I'll be fine with factory tubs or I need aftermarket ones. This is on an '87 by the way. Thanks
That's how we did the white '85 GM racetruck at the proving grounds (no photos available).

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com