|
01-27-2004, 09:15 PM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
|
205 ??
im planning on swapping out my 203 for a 205 in the spring when i fix the tranny. i can get a 205 with the 10 spline shaft<from 456 tranny> i heard there is a way to change the input shaft does anyone have any info on how? how much? or a website with directions i know a guy who has an adapter so that wont be a problem
thanks stan
__________________
79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock  LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS |
|
|
|
01-27-2004, 11:41 PM
|
#2 |
|
Collector of rusty Items
Join Date: Dec 2001
Location: Sisters,Oregon USA
Posts: 731
|
This site tells you how to do a comeplete rebuild, so I guess an input changeout is covered. Are you going to a 350? I think a 400 would require machining to make the input bearing guide larger.
http://www.bulldogs-house.com/Projects/np205/ this is good too http://www.offroaddesign.com/NP205tech.htm
__________________
Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends. |
|
|
|
|
01-28-2004, 12:12 AM
|
#3 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
good luck finding a 350/205 adapter.
|
|
|
|
|
01-28-2004, 01:50 AM
|
#4 | |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,718
|
Quote:
|
|
|
|
|
|
01-28-2004, 10:10 AM
|
#5 |
|
Registered User
Join Date: Dec 2001
Location: New Richmond, WI
Posts: 547
|
I think you will find the parts you need here: http://www.drivetrain.com/transferca...cess Model 205
__________________
Eric 1969 K20, 465/205 package Last edited by HeavyK20; 01-28-2004 at 10:13 AM. |
|
|
|
|
01-28-2004, 07:18 PM
|
#6 |
|
Registered User
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
|
right now i have a 350/203
my 203 is about done so im going to a 205
i called advanced adapters they have a brand new 350/205 adapter for 250 and they have a kit to change the shaft on your tranny go a female 10 spline to fit directly on the 10 spline 205 from a 465 for 277.40 i can find the tranny adapter cheaper here or on ebay but i will still need to change one of the shafts..either tranny or case..my tranny needs rebuilt anyway but 277 seems high for a shaft how much is the 205 shaft to make it for an automatic
__________________
79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS |
|
|
|
|
01-29-2004, 02:02 AM
|
#7 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,718
|
If you have a current 4wd turbo 350 then I believe the ouput shafts are the same between the 205 and the 203 so all you would need is the adaptor and the input gear for the 205. I happen to have what you need. I want 200. plus shipping
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
