|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-03-2015, 08:05 AM
|
#1 |
|
Registered User
Join Date: Mar 2015
Location: Florissant, CO
Posts: 16
|
help no start need to goto work
1972 c20 pickup I have no power at all and hooked up jumpers before wife left to see if it needed a jump. Still nothing. Nothing turns on
|
|
|
|
04-03-2015, 08:11 AM
|
#2 |
|
Registered User
Join Date: Mar 2015
Location: Florissant, CO
Posts: 16
|
Re: help no start need to goto work
Its a 402 BBC /400 turbo I have no power at all. No lights nothing like the battery is dead but isn't.
|
|
|
|
|
04-03-2015, 08:22 AM
|
#3 |
|
Registered User
Join Date: Nov 2012
Location: ravenwood, mo
Posts: 709
|
Re: help no start need to goto work
Check the ground wire that comes off your battery and make sure it has a good connection to the frame.
|
|
|
|
|
04-03-2015, 08:30 AM
|
#4 |
|
Registered User
Join Date: Mar 2015
Location: Florissant, CO
Posts: 16
|
Re: help no start need to goto work
Ground wire from bat runs to block and is tight.
|
|
|
|
|
04-03-2015, 08:35 AM
|
#5 |
|
Registered User
Join Date: Nov 2012
Location: ravenwood, mo
Posts: 709
|
Re: help no start need to goto work
Keep checking your connections. Sounds as though you have a bad ground somewhere. What about your hot wire that goes to the starter?
|
|
|
|
|
04-03-2015, 08:47 AM
|
#6 |
|
Registered User
Join Date: Mar 2013
Location: Charlotte
Posts: 42
|
Re: help no start need to goto work
I'm trying to remember right off, doesn't the positive wire come off the battery and go to the passenger fender wall to a fuseable link? If so, check that link.
__________________
1970 C-10 lwb, 307 V8, THM-400 1998 Camaro Z28, LS1, T-56 6 speed manual (Daily driver) |
|
|
|
|
04-03-2015, 08:50 AM
|
#7 |
|
Registered User
Join Date: Mar 2015
Location: st cloud mn
Posts: 163
|
Re: help no start need to goto work
I have had this happen to me before. I would put money on the fusible link being bad
|
|
|
|
|
04-03-2015, 08:51 AM
|
#8 |
|
Msgt USAF Ret
  
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,719
|
Re: help no start need to goto work
That's not a ground wire, it's a fusible link if it comes off the positive post of the battery. You can replace them but first check that there is no short to ground on the wire that comes off the junction block on the fender.
It's the one on the left.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
|
|
|
|
04-03-2015, 08:59 AM
|
#9 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: help no start need to goto work
Disconnect the two battery cables clean the contacts and hookup the two wires to see if that was the problem
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
04-03-2015, 04:39 PM
|
#10 |
|
Registered User
Join Date: Mar 2015
Location: Florissant, CO
Posts: 16
|
Re: help no start need to goto work
It was the fusible link. Thank yall for the help. I am late for work, but oh well I get a long weekend now. lol
Mine wasn't visible it was hidden behind the battery. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
