Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-23-2015, 09:42 AM | #1 |
Senior Member
Join Date: Mar 2014
Location: Toano, VA
Posts: 893
|
Installing new Master Cylinder Advice
So I decided that the old master cylinder was failing so I got a reman. MC.
I was looking for advice on installing the new one. Drum on drum, 1970 2wd. Problems, things to look for, mistakes you've made to help me not make them, ect. Any help is appreciated, thanks.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809 |
04-23-2015, 10:15 AM | #2 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
|
Re: Installing new Master Cylinder Advice
-
The main thing I can tell you is to be sure and bench bleed it per the instructions in (or on) the box.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
04-23-2015, 10:20 AM | #3 |
Registered User
Join Date: Mar 2015
Location: henrico virginia
Posts: 7
|
Re: Installing new Master Cylinder Advice
I replaced mine when I first bought my 68 all you have to do to remove it is to disconnect the two brake lines and the two screws on the fire wall it pulls right just don't brake proportioning valve as it connects to the right sided stud. idk if you have a booster mine does not. you have to bench bleed the master cylinder which means you have to get all of the air out of the master cylinder. you can buy a kit or just push in on the valve un till theres no more bubbles then pretty much just blead the lines at the master cylinder and the wheels and you will be good to
|
04-23-2015, 11:39 AM | #4 |
Registered User
Join Date: Mar 2015
Location: Fletcher, N.C.
Posts: 309
|
Re: Installing new Master Cylinder Advice
Mine came with the bleed kit and like the others said, definitely bench bleed until all bubbles are gone...
|
04-23-2015, 03:34 PM | #5 |
Registered User
Join Date: Jul 2010
Location: MD
Posts: 1,937
|
Re: Installing new Master Cylinder Advice
Good brakes are one of my peeves. Bench Bleed for sure. I like to pump the fluid into a glass jar to view bubbles & make sure none get pumped back into the cylinder. You will still need to pump new fluid to all four wheel cylinders after install to ensure there is no air in the system. Start at the furthest one from the master first. Speed bleeders make it a very simple one man operation. Have done several this way. Well worth the $25 expense in my opinion.
>> http://www.jegs.com/p/Russell/Russel...44478/10002/-1 Last edited by GRX; 04-23-2015 at 03:42 PM. Reason: link added |
04-23-2015, 07:29 PM | #6 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: Installing new Master Cylinder Advice
All great advice. I would also suggest replacing the wheel cylinders at the same time.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
04-23-2015, 08:22 PM | #7 | |
Registered User
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
|
Re: Installing new Master Cylinder Advice
Quote:
__________________
Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB. |
|
Bookmarks |
Tags |
bleed, brakes, drum, master cylinder |
|
|