|
05-05-2015, 11:12 PM
|
#1 |
|
Registered User
Join Date: Apr 2015
Location: Puyallup WA
Posts: 365
|
lowering 65 c10
i want my truck as low as possible without air bagging it. i am okay with C notching it. currently i am guessing its lowered about 2 inches or so. i understand i will need to convert the front to calipers for drop spinals. any kits or pictures of the lowest kit i could put together.
|
|
|
|
05-06-2015, 12:05 AM
|
#2 |
|
Registered User
Join Date: May 2010
Location: Hillsboro, Oregon 97123
Posts: 1,300
|
Re: lowering 65 c10
Free kit....cut springs and step lower control arms , and welded in c- notch.rear bags on valves.........Ol' skool
__________________
Measure with a yard stick Mark with Chalk Cut with a torch  Built it yourself, don't count on others to to do it for you or with you. It will never get done |
|
|
|
|
05-06-2015, 01:06 AM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
Re: lowering 65 c10
I used 2.5 inch spindles and 2 inch springs in the front and 4 inch springs in the back. I want to go another inch in the back. There is one set of train tracks I hit the lower arm on but I know where it is now and can avoid it. Sorry this is the only pic I have right now.
__________________
66 shorty 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
