|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
05-14-2015, 10:16 AM
|
#5 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: Need help identifying this axle
The spindles are 53 up. You should have the truck brake as they used a truck drum and re-drilled it to fit. Measure the Ubolt holes, the fronts should be narrower than the rears. 29.5" is the AD frame width at that spot so you should have an AD axle and the stop locks are AD not Taskforce.
I suspect that they used later Bendix truck brakes with a car hub on an early axle that had Huck style brakes. |
|
|
| Bookmarks |
|
|
Threaded Mode