|
05-18-2015, 01:55 PM
|
#39 |
|
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Ball joints?
If you don't have a service manual please get one, there is a downloadable PDF manual available on this forum.
You need to remove the outer locking hub first then then straighten the large washer locking tab and remove the large nuts that are used to preload the wheel bearings, then remove the outer bearing, then pull off the outer hub and rotor, then unbolt the hub nuts holding the stub axle, it can be stuck with rust so get a piece of wood and a hammer and work it off, then pull the axle out.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
|
| Bookmarks |
|
|
Threaded Mode