|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-30-2015, 04:26 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Tacoma, WA
Posts: 176
|
Fuel Hard Line for rear mounted tank
Putting in a bed tank in the 62 C20 but didn't think of the fuel lines until tonight.
Has anyone used inlinetube.com for this? I've seen it referenced in at least one post but not sure if this is the way I should go. They say the fuel line is just for the 1/2 ton but I figure it should work fine for the 3/4.
__________________
1965 C10 Longbed Stepside 1969 Chevelle Malibu 1962 C20 Fleetside - Build Thread (Sold before I could finish) |
|
|
|
05-30-2015, 12:22 PM
|
#2 |
|
Senior Member
 
Join Date: Sep 2011
Location: Hanford, CA
Posts: 1,027
|
Re: Fuel Hard Line for rear mounted tank
I believe that is just for the replacement of the factory portion, but I'm anxious to see responses as I'm getting ready to install my boyd tank.
__________________
Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894 |
|
|
|
|
05-30-2015, 12:43 PM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Tacoma, WA
Posts: 176
|
Re: Fuel Hard Line for rear mounted tank
It seems like I could buy this from summit - http://m.summitracing.com/parts/sum-220256 but it's coiled and i don't know if I have the skill to get it right nor the tools to do any flaring but I guess I wouldn't need to flare it, just secure the rubber line at each end.
__________________
1965 C10 Longbed Stepside 1969 Chevelle Malibu 1962 C20 Fleetside - Build Thread (Sold before I could finish) |
|
|
|
|
05-30-2015, 12:53 PM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 555
|
Re: Fuel Hard Line for rear mounted tank
The inline kit is for factory tank.you can buy 6' lengths of stainless 3/8" tubing.i invested in a rigid flaring tool and got a bender from inline.used an fittings.worth the small investment imo.did a bunch of other things as well,fuel pump to carb,pcv etc.will post pics later
|
|
|
|
|
05-30-2015, 01:54 PM
|
#5 | |
|
Senior Member
Join Date: Sep 2011
Location: Hanford, CA
Posts: 1,027
|
Re: Fuel Hard Line for rear mounted tank
Quote:
Thanks.
__________________
Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894 |
|
|
|
|
|
05-30-2015, 06:50 PM
|
#6 |
|
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 555
|
Re: Fuel Hard Line for rear mounted tank
|
|
|
|
|
05-30-2015, 07:27 PM
|
#7 |
|
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 555
|
Re: Fuel Hard Line for rear mounted tank
|
|
|
|
|
05-30-2015, 07:33 PM
|
#8 |
|
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 555
|
Re: Fuel Hard Line for rear mounted tank
|
|
|
|
|
05-30-2015, 08:01 PM
|
#9 |
|
Registered User
Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: Fuel Hard Line for rear mounted tank
i have a fuel pump.filter and fuel line 3/8 and all of the fittings . if someone is interested. was going in my truck but it was sold. pm me for more imfo and pictures if you want
|
|
|
|
|
05-31-2015, 12:33 AM
|
#10 |
|
Registered User
Join Date: Dec 2007
Location: N Texas
Posts: 580
|
Re: Fuel Hard Line for rear mounted tank
I bought a roll of aluminum tube and ran/built/flared my own. Don't forget to put a vent tube on the tank. Make a 360 degree loop in the vent.
__________________
292 + TKO500 |
|
|
|
|
05-31-2015, 12:38 AM
|
#11 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Fuel Hard Line for rear mounted tank
Stainless is definitely the best way to go. But you can also use the straight length of coated steel line found at your local auto parts supplier along with some couplings. You can pickup one of those inexpensive tubing benders at HF as well as many other stores.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
