Motor Mount Help!

[padresag]

Originally Posted by LDO

Ok,
1966 C10 had a 283 installing a 350, 4 speed using the original bell housing and crossmember.

Here are the mounts I removed from the truck that look pretty beat up and have missing material where the motor mounts bolt runs thru so I figured I would replace them.



Here are the mounts I received but I believe the right side will not work for my application. Looks like one for an I6 application.


Should I try to repair my originals or look for another mount to replace the 'shorter' one??

Advice....

just weld them up and and grind it flush. that was more than likely caused by loose bolts.
ron