GA 1970 CST parting out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

In The Ten Ring · 06-06-2015, 12:02 AM

I'd be interested in the white seat belts IF that other fellow isn't going to buy them and they are in nice shape.

Do you have the bracket that the hood latch is attached to?

gregbr · 06-07-2015, 02:26 AM

Will you be cutting off any frame parts? I need the rear shock mounts & the rear mounts off the rear leaf springs. Post a pic & price. Greg

jasonmiddlebrooks · 06-10-2015, 09:52 AM

sent you a PM about a driver side door. Would also like to find out what other parts you have left. I am located close to you.

dal85jd · 06-10-2015, 05:51 PM

Does the truck have leaf springs? I am looking for shackles for the rear leaf springs. I am Also looking for the bar/rod that connected the front tie rods, it's about 51" long.
Posted via Mobile Device

Mjminino · 06-10-2015, 08:04 PM

Still looking for the center link/drag link if it is original, thanks!

57 sc · 06-10-2015, 08:27 PM

Do you still have the power steering brackets, power steering pump and pulley. Water pump pulley, and crank pulley too.
Thanks, Dave

chevyman70 · 06-12-2015, 01:06 AM

do you still have the bench seat? I need the spring mechanism that goes on the bench seat track for both driver and passenger. I'll attach pics to see whats missing. ship 70 90713. thanks! Name: IMG_3611 2.jpg
Views: 169
Size: 27.4 KB

Name: IMG_3611 2.jpg
Views: 169
Size: 27.4 KB

*mjgord51* · 06-16-2015, 01:22 AM

Quote:

Originally Posted by mjgord51

Did you forget about me, Still looking for a heater Control Panel w/ good tight rivets with lever arms all in good working order, Thanks, mjgord

Still looking for Heater Control Panel, can PM me with answer & payment method . Thanks, mjgord51

**FL71C10** · 06-16-2015, 07:15 AM

Quote:

Originally Posted by FL71C10

Is the rear window trim any good?

Just checking on this again.

rkbatt · 06-21-2015, 01:39 PM

Do you have the elbow piece that attaches the vacuum diaphragm to the outside air door in the cowl? Also need the spring that attaches from the air door to the cowl. This is on the passenger side firewall just above where the heater hoses connect to the firewall. Thanks

roushinator · 06-23-2015, 12:07 PM

Quote:

Originally Posted by roushinator

What shape is the passenger front fender and how much?

Still have a passenger Fender?

72lady · 06-24-2015, 10:11 PM

Pm sent

empi1776 · 06-25-2015, 11:02 AM

Hi
how much for brake pedal pad, gas pedal pad and emergency brake pedal pad. To 75181.
thank you
Danny

**heehawracing** · 06-25-2015, 11:10 AM

theres nothing left on this truck
thanks

06-06-2015, 12:02 AM	#76
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: 1970 CST parting out I'd be interested in the white seat belts IF that other fellow isn't going to buy them and they are in nice shape. Do you have the bracket that the hood latch is attached to?

06-07-2015, 02:26 AM	#77
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: 1970 CST parting out Will you be cutting off any frame parts? I need the rear shock mounts & the rear mounts off the rear leaf springs. Post a pic & price. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

06-10-2015, 09:52 AM	#78
jasonmiddlebrooks Registered User Join Date: May 2015 Location: Hampton, GA Posts: 17	Re: 1970 CST parting out sent you a PM about a driver side door. Would also like to find out what other parts you have left. I am located close to you.

06-10-2015, 05:51 PM	#79
dal85jd Registered User Join Date: Oct 2013 Location: Norfolk, VA Posts: 4	Re: 1970 CST parting out Does the truck have leaf springs? I am looking for shackles for the rear leaf springs. I am Also looking for the bar/rod that connected the front tie rods, it's about 51" long. Posted via Mobile Device

06-10-2015, 08:04 PM	#80
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: 1970 CST parting out Still looking for the center link/drag link if it is original, thanks!

06-10-2015, 08:27 PM	#81
57 sc Registered User Join Date: Oct 2014 Location: Loveland CO Posts: 25	Re: 1970 CST parting out Do you still have the power steering brackets, power steering pump and pulley. Water pump pulley, and crank pulley too. Thanks, Dave

06-12-2015, 01:06 AM	#82
chevyman70 Registered User Join Date: May 2002 Location: Lakewood, CA Posts: 194	Re: 1970 CST parting out do you still have the bench seat? I need the spring mechanism that goes on the bench seat track for both driver and passenger. I'll attach pics to see whats missing. ship 70 90713. thanks! Attached Images

06-21-2015, 01:39 PM	#85
rkbatt Registered User Join Date: Jun 2015 Location: Goddard, KS Posts: 10	Re: 1970 CST parting out Do you have the elbow piece that attaches the vacuum diaphragm to the outside air door in the cowl? Also need the spring that attaches from the air door to the cowl. This is on the passenger side firewall just above where the heater hoses connect to the firewall. Thanks Attached Images

06-24-2015, 10:11 PM	#87
72lady Registered User Join Date: Aug 2014 Location: SC Posts: 33	Re: 1970 CST parting out Pm sent

06-25-2015, 11:02 AM	#88
empi1776 Registered User Join Date: Jan 2008 Location: Dallas TX Posts: 69	Re: 1970 CST parting out Hi how much for brake pedal pad, gas pedal pad and emergency brake pedal pad. To 75181. thank you Danny

06-25-2015, 11:10 AM	#89
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 CST parting out theres nothing left on this truck thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.