Detent cable bracket

[gmachinz]

You also need to carefully adjust the TV cable on the OD transmissions to prevent early valve body failure. There's a clip that you pull up on and seat the cable in fully-once mounted, connect to carb, then slowly open throttle up fully, once you have the throttle fully open, snap the clip back down-your TV is now adjusted. You need to use the correct bracket too though-Edelbrock has a dedicated TV cable bracket for use with their carbs-don't try to use a stock OD bracket from a Q-Jet engine....just order the correct bracket from Edelbrock-Summit/Jegs whatever.