6000 rpm tach anyone... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 08-10-2013, 11:35 PM

The truck will eventually have a destroked LS2 with solid lifters and shaft rockers so it'll do 8k easily. Got the 120 mph speedo covered too, and then some! I photoshopped a 160 mph speedo and sent it to Jason at Greenback so he could make the artwork and have his screen printing guy make a lens. Still waiting to get it back, this is just the photoshopped pic.

Posted via Mobile Device

earl84 · 08-12-2013, 09:00 AM

Well, I got it installed. Here's a pic. It took a lot of head scratching and figuring, but it's in. Now to finish the gauge cluster, just about there.
I also replaced the ammeter with a voltmeter, that I read from RoyL here, http://67-72chevytrucks.com/vboard/s...d.php?t=443318 , changed the Tand'm Lock light to a Park Brake light for a future modification from jocko that I read about here, http://67-72chevytrucks.com/vboard/s...d.php?t=419932 , did some restoring on the cluster that I read about from the astronaut here, http://67-72chevytrucks.com/vboard/s....php?p=5806390 . Didn't do a full restore with new decals, trying to keep it a little worn looking for a daily driver. Maybe I will later when/if I do a full restore.

I am trying to attach the file that I got from Persh's web site. I did modify it to make it a 6K RPM tach face that looks similar to factory. If you use it, it will require some trimming. I printed it on some see through labels I got at Staples, Avery Clear Full Sheet Label, product #18665. The first label I could sort of see through, and the numbers that were over the inverted "T" of the factory backing plate showed through. So I painted it the Krylon Jade Green and tried again. I think it looks pretty good for a complete rookie.

Hope everything on the gauge cluster works now.

earl84 · 08-12-2013, 09:08 AM

Hmm, document didn't show up. Try again.

earl84 · 08-12-2013, 04:16 PM

Got it all put back together. Sorry for the crappy pic.

par4tom · 08-12-2013, 05:27 PM

Don't apologize...that thing is BEAUTIFUL!

theastronaut · 08-12-2013, 05:30 PM

Neat trick with the Avery label and green background! Looks great!
Posted via Mobile Device

LostMy65 · 08-16-2013, 12:19 PM

I've been reading up on vinyl waterproof inkjet printing paper.
There's YouTube videos that demonstrate how to make stickers and decals.
It appears it wouldn't be that difficult to reface.
Posted via Mobile Device

LostMy65 · 08-16-2013, 06:00 PM

Quote:

Originally Posted by earl84

Hey, chevysdominate, can you share any more details on how you did this? It looks SO NICE. And I do like your execution of it better than the original article you used as a reference. Would love some more details if you have the time.
Incidentally, that tach is available at Carquest, P/N 81316, $59.99 online.

That Tach you list appears to be 2" Diameter.
I think we need Part Number: 81315 - Price: $72.99

earl84 · 08-17-2013, 10:20 AM

LostMy 65, the one I used and installed was indeed the 2 inch, P/N 81316. Chevysdominate referenced the original article that he modified and it used a 2 inch tach as well.
Basically, all you use is the guts of the tach, you take it completely apart and use your own blank plate out of your dash and screw the guts to it after slight modification. It fits well. You also end up having to trim down the inner case and the black exterior case to screw on the back.
Also, I wish I would have done a little more research on the decal material on Youtube, dang it. I think it would have been much easier to print on a different material, like that vinyl waterproof inkjet printing paper, but it did work out OK. Still like how mine turned out in the end, but did have to paint the blank plate the Jade Green to get it to look right, as I wrote up.

LostMy65 · 08-17-2013, 11:15 AM

^ I missed that about you guys using the 2" one.
Thanks
Posted via Mobile Device

Rich 5150 69 · 01-17-2014, 01:57 PM

Just picked up this tach for my install, its a no name but its believed to be a Sun tach by all markings on it, a fleabay item broken lens and mount which was fine, seller did say it worked, cost me all of $15.00 so if it dosen`t not much of a loss, its actually a two inch gauge stuffed into a 3.5 inch pod as shown after removal from pod, three wire hookup, hot, ground, and pickup.

Grandpa54 · 06-01-2015, 09:25 PM

Quote:

Originally Posted by theastronaut

thanks for posting this, i wanted a tach that went to 10k and looked stock but didn't know how to do it... So i paid to have one made. I like to do stuff myself though so this is good info for the next project!

Here's mine, jason at greenback decal built it from a block-off plate.

theastronaut, do you mind sharing who did your tach

theastronaut · 06-01-2015, 10:54 PM

Jason at Greenback Decal built it.

Chevysdominate · 06-01-2015, 11:24 PM

Looks good! I cant believe i missed so much of this thread.

Quote:

Originally Posted by earl84

Got it all put back together. Sorry for the crappy pic.

McStuffin · 07-11-2015, 08:46 PM

To revisit an old thread... has any company decided to make a decal set to have a 6000rpm tach?

08-10-2013, 11:35 PM	#26
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: 6000 rpm tach anyone... The truck will eventually have a destroked LS2 with solid lifters and shaft rockers so it'll do 8k easily. Got the 120 mph speedo covered too, and then some! I photoshopped a 160 mph speedo and sent it to Jason at Greenback so he could make the artwork and have his screen printing guy make a lens. Still waiting to get it back, this is just the photoshopped pic. Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

08-12-2013, 09:00 AM	#27
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: 6000 rpm tach anyone... Well, I got it installed. Here's a pic. It took a lot of head scratching and figuring, but it's in. Now to finish the gauge cluster, just about there. I also replaced the ammeter with a voltmeter, that I read from RoyL here, http://67-72chevytrucks.com/vboard/s...d.php?t=443318 , changed the Tand'm Lock light to a Park Brake light for a future modification from jocko that I read about here, http://67-72chevytrucks.com/vboard/s...d.php?t=419932 , did some restoring on the cluster that I read about from the astronaut here, http://67-72chevytrucks.com/vboard/s....php?p=5806390 . Didn't do a full restore with new decals, trying to keep it a little worn looking for a daily driver. Maybe I will later when/if I do a full restore. I am trying to attach the file that I got from Persh's web site. I did modify it to make it a 6K RPM tach face that looks similar to factory. If you use it, it will require some trimming. I printed it on some see through labels I got at Staples, Avery Clear Full Sheet Label, product #18665. The first label I could sort of see through, and the numbers that were over the inverted "T" of the factory backing plate showed through. So I painted it the Krylon Jade Green and tried again. I think it looks pretty good for a complete rookie. Hope everything on the gauge cluster works now. Attached Images

08-12-2013, 04:16 PM	#29
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: 6000 rpm tach anyone... Got it all put back together. Sorry for the crappy pic. Attached Images

08-12-2013, 05:27 PM	#30
par4tom Registered User Join Date: Nov 2012 Location: Kingsburg CA Posts: 581	Re: 6000 rpm tach anyone... Don't apologize...that thing is BEAUTIFUL! __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=705185 How to Get Audiophile Sound in 60-66 Trucks http://67-72chevytrucks.com/vboard/s...=1#post7236896 Building Your Own Speaker Kick Pods http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495

08-12-2013, 05:30 PM	#31
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: 6000 rpm tach anyone... Neat trick with the Avery label and green background! Looks great! Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

08-16-2013, 12:19 PM	#32
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 6000 rpm tach anyone... I've been reading up on vinyl waterproof inkjet printing paper. There's YouTube videos that demonstrate how to make stickers and decals. It appears it wouldn't be that difficult to reface. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-17-2013, 10:20 AM	#34
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: 6000 rpm tach anyone... LostMy 65, the one I used and installed was indeed the 2 inch, P/N 81316. Chevysdominate referenced the original article that he modified and it used a 2 inch tach as well. Basically, all you use is the guts of the tach, you take it completely apart and use your own blank plate out of your dash and screw the guts to it after slight modification. It fits well. You also end up having to trim down the inner case and the black exterior case to screw on the back. Also, I wish I would have done a little more research on the decal material on Youtube, dang it. I think it would have been much easier to print on a different material, like that vinyl waterproof inkjet printing paper, but it did work out OK. Still like how mine turned out in the end, but did have to paint the blank plate the Jade Green to get it to look right, as I wrote up.

08-17-2013, 11:15 AM	#35
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 6000 rpm tach anyone... ^ I missed that about you guys using the 2" one. Thanks Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-17-2014, 01:57 PM	#36
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: 6000 rpm tach anyone... Just picked up this tach for my install, its a no name but its believed to be a Sun tach by all markings on it, a fleabay item broken lens and mount which was fine, seller did say it worked, cost me all of $15.00 so if it dosen`t not much of a loss, its actually a two inch gauge stuffed into a 3.5 inch pod as shown after removal from pod, three wire hookup, hot, ground, and pickup. Attached Images __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

06-01-2015, 10:54 PM	#38
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: 6000 rpm tach anyone... Jason at Greenback Decal built it. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-11-2015, 08:46 PM	#40
McStuffin Registered User Join Date: Jun 2015 Location: West Coast Posts: 14	Re: 6000 rpm tach anyone... To revisit an old thread... has any company decided to make a decal set to have a 6000rpm tach?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.