The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-26-2015, 08:31 AM   #26
racerop
Registered User
 
racerop's Avatar
 
Join Date: Jul 2015
Location: Laurel Springs, NJ
Posts: 94
Re: Heater core shutoff valve…revisited

Quote:
Originally Posted by LuckyLightning View Post
I just drove the truck today for a few hours in the hottest part of the day. I think what I saw was the temp rising before the thermostat opened up. I saw it happen again today - the temp would rise until the thermostat opened up, then go back down to normal. Interesting thing was it happened every time I turned off the truck for more than a few minutes (such as when pumping gas). I assume this is normal operation, but I never noticed it before.
I had a car have the same symptoms as what you are describing. I would flush/refill with new coolant and replace the thermostat. The thermostat is probably sticking while opening.
racerop is offline   Reply With Quote
Old 07-26-2015, 02:12 PM   #27
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,189
Re: Heater core shutoff valve…revisited

After running at operating temperature, then shutting off the vehicle, it will normally increase in engine temperature because the fan is not running and the coolant is not circulating. After sitting for awhile, the engine will normalize to ambient temperature. With a big block this effect is magnified because they have less air space around the engine/exhaust manifold to dissipate the heat.

My experience and $.02,.
tucsonjwt is offline   Reply With Quote
Old 07-28-2015, 09:35 AM   #28
LuckyLightning
Registered User
 
LuckyLightning's Avatar
 
Join Date: Nov 2005
Location: Round Rock, TX
Posts: 348
Re: Heater core shutoff valve…revisited

Thanks tucsonjwt, I kinda figured that might be what was going on. Appreciate the confirmation.
__________________
Michael
- 1962 C20 LB stepside (project thread) - sold
- 1963 Chevy C10 LB stepside (donor)
- 1963 Chevy C10 LB Custom flatbed (project thread) - sold
- 1979 K20 LB fleetside (project thread)

Favorite exchange on the board so far:
ol_Curt: "Jason, do you have power steering?"
jason65: "No, but I lift weights."
LuckyLightning is offline   Reply With Quote
Old 07-28-2015, 03:48 PM   #29
Bigstevex4
Registered User
 
Bigstevex4's Avatar
 
Join Date: Oct 2014
Location: Spearfish South Dakota
Posts: 407
Re: Heater core shutoff valve…revisited

Quote:
Originally Posted by LuckyLightning View Post
I just drove the truck today for a few hours in the hottest part of the day. I think what I saw was the temp rising before the thermostat opened up. I saw it happen again today - the temp would rise until the thermostat opened up, then go back down to normal. Interesting thing was it happened every time I turned off the truck for more than a few minutes (such as when pumping gas). I assume this is normal operation, but I never noticed it before.
That's normal the heat is rising to the thermostat. I have a Manuel temp gauge at the stat it will rise 20 degrees when shut it off.
__________________
83 c10 long Box Daily Driver
90 Jimmy parked
98 Road King/ 06 Road Glide
In memorium
63 impala SS/ 65 Chevy Panel
65 GMC Short Box/ 68 Camero
Bigstevex4 is offline   Reply With Quote
Old 08-03-2015, 03:03 PM   #30
roger97338
Registered User
 
roger97338's Avatar
 
Join Date: Apr 2009
Location: Oregon
Posts: 34
Re: Heater core shutoff valve…revisited

Quote:
Originally Posted by LuckyLightning View Post
I just drove the truck today for a few hours in the hottest part of the day. I think what I saw was the temp rising before the thermostat opened up. I saw it happen again today - the temp would rise until the thermostat opened up, then go back down to normal. Interesting thing was it happened every time I turned off the truck for more than a few minutes (such as when pumping gas). I assume this is normal operation, but I never noticed it before.
Being able to see the gauge fluctuate like that often means that there are still air bubbles (or one large air pocket?) in the cooling system.
roger97338 is offline   Reply With Quote
Old 08-04-2015, 05:22 PM   #31
LuckyLightning
Registered User
 
LuckyLightning's Avatar
 
Join Date: Nov 2005
Location: Round Rock, TX
Posts: 348
Re: Heater core shutoff valve…revisited

I believe it roger97338. How do I get rid of the air pocket(s)?
__________________
Michael
- 1962 C20 LB stepside (project thread) - sold
- 1963 Chevy C10 LB stepside (donor)
- 1963 Chevy C10 LB Custom flatbed (project thread) - sold
- 1979 K20 LB fleetside (project thread)

Favorite exchange on the board so far:
ol_Curt: "Jason, do you have power steering?"
jason65: "No, but I lift weights."
LuckyLightning is offline   Reply With Quote
Old 08-06-2015, 07:51 AM   #32
Liberty
Registered User
 
Liberty's Avatar
 
Join Date: Feb 2015
Location: Bonham, Texas
Posts: 241
Re: Heater core shutoff valve…revisited

Quote:
Originally Posted by LuckyLightning View Post
I believe it roger97338. How do I get rid of the air pocket(s)?
Run it a bit without the rad cap on, should see it burp and drop fluid level. Driving it around can also help. (with the cap on of course!)
Liberty is offline   Reply With Quote
Old 08-06-2015, 08:41 PM   #33
LuckyLightning
Registered User
 
LuckyLightning's Avatar
 
Join Date: Nov 2005
Location: Round Rock, TX
Posts: 348
Re: Heater core shutoff valve…revisited

Great, thanks Liberty for the advice.
__________________
Michael
- 1962 C20 LB stepside (project thread) - sold
- 1963 Chevy C10 LB stepside (donor)
- 1963 Chevy C10 LB Custom flatbed (project thread) - sold
- 1979 K20 LB fleetside (project thread)

Favorite exchange on the board so far:
ol_Curt: "Jason, do you have power steering?"
jason65: "No, but I lift weights."
LuckyLightning is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com