looking for 67-72 C60 owners for HELP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greywuuf · 06-19-2015, 04:03 PM

ok guys I am putting my C60 back together, it was dissasembled some 10-15 years ago, I am scouring my mess for bolts and such but I am sure some of it has gotten lost in 2 moves. I may need some photo's or other reminders of how and where things went. if anyone has a complete fairly original one Speak up please I may need to lean on you!

Also... mine is a 427 with a 5 speed, has a big heavy Double disc clutch in it.

any recommendations on a new pressure plate? ( or even where I may find parts to rebuild the old one )

it may have had a throw out bearing issue before it came apart.

**kwmech** · 06-23-2015, 09:48 PM

Quote:

Originally Posted by greywuuf

it may have had a throw out bearing issue before it came apart.

Maybe just a little, don't know how to help you on the parts being in Alaska

junkmandan3 · 06-24-2015, 10:26 PM

Any automotive supply house dealing in medium duty trucks should have no problem . Custom Clutch in Cleveland, for example .

greywuuf · 06-24-2015, 11:49 PM

well the clutch issue I am having is my Disc measures at 12" , no one has a reference going back to 68-69 and the newer stuff all says it is a 13" clutch... so maybe they measure something other than the disc or .... anyway, I am more interested in getting pictures of Say the front motor mounts and stuff, I don't think I have everything that came off of mine and it has been so long I certainly do not recall what went where.

dwcsr · 08-06-2015, 05:19 PM

measure the flywheel and the clutch cover disc surface and see if its not 13". c60 with a 427 should have a 13" disc. a c30 or c40 with a 350 would be 12"

greywuuf · 08-06-2015, 05:25 PM

Flywheel is big! Would take a 13" easily, my pressure plate measures 12" ....there are two.....just so as to be clear ...it is a dual disk set up.... Well the contact surface is 12....I can get 13 if I go to the bolt circle....that is why I was wondering how they were measured.

dwcsr · 08-07-2015, 10:13 AM

So you have a flywheel, a disc then a center plate and then another disc and then the cover? That's going to be hard to find in a regular parts house, you need a heavy truck part house or a clutch rebuilder.

try these guys
http://www.alaskaclutchrebuilders.com/ they may be able to point you in the right direction.

06-19-2015, 04:03 PM	#1
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 517	looking for 67-72 C60 owners for HELP! ok guys I am putting my C60 back together, it was dissasembled some 10-15 years ago, I am scouring my mess for bolts and such but I am sure some of it has gotten lost in 2 moves. I may need some photo's or other reminders of how and where things went. if anyone has a complete fairly original one Speak up please I may need to lean on you! Also... mine is a 427 with a 5 speed, has a big heavy Double disc clutch in it. any recommendations on a new pressure plate? ( or even where I may find parts to rebuild the old one ) it may have had a throw out bearing issue before it came apart. Last edited by greywuuf; 06-19-2015 at 04:28 PM.

06-24-2015, 10:26 PM	#3
junkmandan3 Registered User Join Date: Dec 2013 Location: Northfield,Ohio Posts: 221	Re: looking for 67-72 C60 owners for HELP! Any automotive supply house dealing in medium duty trucks should have no problem . Custom Clutch in Cleveland, for example .

06-24-2015, 11:49 PM	#4
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 517	Re: looking for 67-72 C60 owners for HELP! well the clutch issue I am having is my Disc measures at 12" , no one has a reference going back to 68-69 and the newer stuff all says it is a 13" clutch... so maybe they measure something other than the disc or .... anyway, I am more interested in getting pictures of Say the front motor mounts and stuff, I don't think I have everything that came off of mine and it has been so long I certainly do not recall what went where.

08-06-2015, 05:19 PM	#5
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: looking for 67-72 C60 owners for HELP! measure the flywheel and the clutch cover disc surface and see if its not 13". c60 with a 427 should have a 13" disc. a c30 or c40 with a 350 would be 12"

08-06-2015, 05:25 PM	#6
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 517	Re: looking for 67-72 C60 owners for HELP! Flywheel is big! Would take a 13" easily, my pressure plate measures 12" ....there are two.....just so as to be clear ...it is a dual disk set up.... Well the contact surface is 12....I can get 13 if I go to the bolt circle....that is why I was wondering how they were measured.

08-07-2015, 10:13 AM	#7
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: looking for 67-72 C60 owners for HELP! So you have a flywheel, a disc then a center plate and then another disc and then the cover? That's going to be hard to find in a regular parts house, you need a heavy truck part house or a clutch rebuilder. try these guys http://www.alaskaclutchrebuilders.com/ they may be able to point you in the right direction.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.