|
08-09-2015, 01:38 PM
|
#1 |
|
Registered User
Join Date: Dec 2014
Location: oxfordshire in ENGLAND
Posts: 100
|
front grill
how hard is it to get the front grill off a 64 c10,3 small nuts behind the head lights are some off the hardest to get too,i would rather change a engine.
|
|
|
|
08-09-2015, 01:56 PM
|
#2 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: front grill
the bolts are accessible in the fender well. My 66' had 3 bolts per side, earlier models had 4 bolts. 10 minute job.
__________________
If you don't like this  pound sand .....
|
|
|
|
|
08-09-2015, 02:22 PM
|
#3 | |
|
Registered User
Join Date: Dec 2014
Location: oxfordshire in ENGLAND
Posts: 100
|
Re: front grill
Quote:
|
|
|
|
|
|
08-09-2015, 09:32 PM
|
#4 |
|
Registered User
Join Date: Feb 2013
Location: Cottonwood, Arizona
Posts: 1,382
|
Re: front grill
As T and S said, there are 3 bolts on each side in a triangle pattern, acessible from behind the wheels. Heads on the bolts are 1/2". Dont forget to unhook the headlite harness from the core support
|
|
|
|
|
08-09-2015, 09:36 PM
|
#5 |
|
Registered User
Join Date: Feb 2013
Location: Cottonwood, Arizona
Posts: 1,382
|
Re: front grill
As T and S stated, there are 3 bolts on each side in a triangle pattern. Acessible from behind the front wheels. Heads on the bolts are 1/2"
|
|
|
|
|
08-10-2015, 01:06 PM
|
#6 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: front grill
As stated, the bolts are 1/2" (13mm). You have to get in the wheel well where the tire is to access these bolts. You CAN NOT get them from the front of the grill.
__________________
If you don't like this pound sand .....
|
|
|
|
|
08-10-2015, 03:31 PM
|
#7 |
|
Registered User
Join Date: Dec 2014
Location: oxfordshire in ENGLAND
Posts: 100
|
Re: front grill
thanks for all the advice, new grill on with new headlight bezels and front bumper,looking good well happy
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
