Trans Mount Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 08-11-2015, 03:18 PM

I am trying to fit my engine transmission in the 64 Step side Short bed and have a 2X4 board across the lower frame rails holding up the trans under the trans mount. It’s not hitting the body/tunnel but just barely, it clears.

What type of trans crossmember mounts would come close to this (automatic tranny), does anyone know? I’m going to use a column shift setup. Thanks.

YOLO · 08-11-2015, 04:57 PM

I bought the kit from Performance Online.

**The Rocknrod** · 08-11-2015, 06:04 PM

Quote:

Originally Posted by YOLO

I bought the kit from Performance Online.

Did you use both the trans and engine mounts?
https://www.performanceonline.com/19...ION-MOUNT-KIT/

**DPowers** · 08-11-2015, 06:23 PM

Quite a bit of info in the FAQ section.

**The Rocknrod** · 08-11-2015, 07:29 PM

Not enough on this question. Already checked. Thanks though.

YOLO · 08-11-2015, 07:57 PM

Quote:

Originally Posted by The Rocknrod

Did you use both the trans and engine mounts?
https://www.performanceonline.com/19...ION-MOUNT-KIT/

Yes, I used both. Bought through Ebay and got it for cheaper and free shipping.

**The Rocknrod** · 08-11-2015, 09:10 PM

I am using their engine mounts thats why I asked. "If" I need to raise the rear of the tranny I can use an aluminum spacer/block I suppose.
I'm attempting to match the pinion angle so I will have to use a 6 degree shim in the rear since (lowered) I'm using the stock trailing arm crossmember.
Thanks

08-11-2015, 03:18 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Trans Mount Question I am trying to fit my engine transmission in the 64 Step side Short bed and have a 2X4 board across the lower frame rails holding up the trans under the trans mount. It’s not hitting the body/tunnel but just barely, it clears. What type of trans crossmember mounts would come close to this (automatic tranny), does anyone know? I’m going to use a column shift setup. Thanks. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-11-2015 at 04:38 PM.

08-11-2015, 04:57 PM	#2
YOLO Custom Truck Lover! Join Date: Nov 2007 Location: Phoenix, AZ Posts: 440	Re: Trans Mount Question I bought the kit from Performance Online. __________________ Squarebody guy

08-11-2015, 06:23 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,454	Re: Trans Mount Question Quite a bit of info in the FAQ section. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-11-2015, 07:29 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Trans Mount Question Not enough on this question. Already checked. Thanks though. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-11-2015, 09:10 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Trans Mount Question I am using their engine mounts thats why I asked. "If" I need to raise the rear of the tranny I can use an aluminum spacer/block I suppose. I'm attempting to match the pinion angle so I will have to use a 6 degree shim in the rear since (lowered) I'm using the stock trailing arm crossmember. Thanks __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.