Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-11-2015, 07:24 PM | #1 |
Registered User
Join Date: Jun 2014
Location: Connecticut
Posts: 521
|
Carburetor gel mystery
Has anyone experienced gasoline gelling? I started having a drivability problem that acted like vapor lock while driving it on a hot day for the first time. Long story short, I ended up with a new intake manifold and while I was at it I upgraded to a serpentine belt drive, replacing the alternator and power steering pump in the process.
The truck briefly ran okay after the upgrades, but soon returned to stumbling before just refusing to run. There was no fuel coming out of the accelerator pump squirter, so before going to the carburetor I replaced the fuel pump and the rubber line the P.O. installed to the rear mounted tank with a hard line with rubber connections on the ends. When it still wouldn't run, I bit the bullet and purchased a new carb. After installing that carb and getting the truck running, I decided to take the old carb apart to see what I could see. This is what I found. A gel like substance in the bottom of the bowl. Additionally the accelerator pump I replaced when I rebuilt the carb over the winter had fallen apart. For the life of me I can't figure out where it came from. The tank is new this spring, the gas in it is probably a month old at most, and there was nothing in the old glass fuel filter to indicate a problem. The only thing I can think of is that the o-ring on my bed mounted gas cap isn't as good as it could be, allowing water. But would water cause the gelling? And why wouldn't it show up elsewhere in the system? I had plenty of fuel flowing through the old hoses as I replaced them. |
08-12-2015, 08:13 AM | #2 |
Registered User
Join Date: Apr 2014
Location: Fate, Texas ( About 35 miles east of Dallas)
Posts: 318
|
Re: Carburetor gel mystery
I have worked in the marine industry for a while and have seen this in carbs that I have rebuilt. I have "heard" that it is a kind of bacteria that forms. Have you ran any additives in your fuel?
|
08-12-2015, 11:04 AM | #3 |
Registered User
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: Carburetor gel mystery
My motorcycle carbs looked like that . Here in Cali its the cheep gas .
I use "sea foam" to prevent it
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
08-12-2015, 11:07 AM | #4 |
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: Carburetor gel mystery
Use non-ethanol fuel, and you won't have that problem.
|
08-12-2015, 11:11 AM | #5 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: Carburetor gel mystery
X2 with the use of "Seafoam"....stuff works!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
08-12-2015, 11:22 AM | #6 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
Re: Carburetor gel mystery
here in albuquerque, all the gas has ethonal year round now. this gelling was in my old carb in my daily driver. it clogged up the bowl and outlet and the stone filter. i use seafoam now with every oil change. havent had a problem since
__________________
1967custom |
08-12-2015, 02:10 PM | #7 |
Registered User
Join Date: Jun 2014
Location: Connecticut
Posts: 521
|
Re: Carburetor gel mystery
Sounds like its an ethanol thing. Until last night I hadn't put any additives in my tank because the current tank of fuel is less than a month old, but it was sitting there while I worked on it. I added some Sta-bil to this tank and going forward I'm going to switch gas stations.
|
08-12-2015, 03:32 PM | #8 |
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
|
Re: Carburetor gel mystery
Sorry to see that...us diesel guys have had to deal with that from time to time, and all it takes is one bad fill up from a contaminated tank at a filling station. As the others mentioned the probable culprit is the alcohol - which is hydroscopic (attracts water). There are additives to kill the algae first, and then other additives to eliminate water from the system as a preventative maintenance measure.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
08-12-2015, 03:44 PM | #9 | |
Registered User
Join Date: Jun 2014
Location: Connecticut
Posts: 521
|
Re: Carburetor gel mystery
Quote:
|
|
08-13-2015, 09:28 PM | #10 |
Registered User
Join Date: Oct 2012
Location: Eldon, MO
Posts: 1,753
|
Re: Carburetor gel mystery
I'm not sure about where you live, but here Ethanol can be avoided by buying the "premium" (91 octane) gasoline, so switching gas stations may not change anything, but switching fuel grades might. The pumps should be labeled. In fact a lot of stations are now advertising "no ethanol in premium" on their signs. It does cost more, but you are probably not using much fuel in that anyway. I also use ethanol free in all my small engines for that very reason.
|
08-13-2015, 09:45 PM | #11 | |
Registered User
Join Date: Jun 2014
Location: Connecticut
Posts: 521
|
Re: Carburetor gel mystery
Quote:
|
|
Bookmarks |
|
|