|
|
|
08-23-2015, 02:46 PM
|
#1 |
|
Registered User
Join Date: Apr 2014
Location: placerville
Posts: 72
|
Pretty much realized I have to drop my transfer case now. Took the 4 bolts out of the flange on the output shaft. Also took off the for nuts for the U bolts holding the rear drive line. Neither wants to break free though, do I have to undo the carrier bearing bracket and drop the whole back end to get it to pull away from the transfer case yolk?
Posted via Mobile Device |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
