Stock TH350 Pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**geunther** · 09-09-2015, 11:43 PM

Just wanted to thank all for the recommendations on sealing the pan up. I was able to straighten all the sides and worked the bolt holes down a bit. Installed a cork gasket with only a little copper to tack the gasket in a few spots.

Unfortunately it did not cure all the leaks. The spark control switch was leaking too, but I got that fixed now and so far, leak free. Thanks!

BTW maybe next time I won't use my wife's counter top's flat surface to check for trueness.

I tightened to 90" pounds

09-09-2015, 11:43 PM	#12
geunther Senior Member Join Date: Apr 2005 Location: Cheyenne, WY Posts: 740	Re: Stock TH350 Pan Just wanted to thank all for the recommendations on sealing the pan up. I was able to straighten all the sides and worked the bolt holes down a bit. Installed a cork gasket with only a little copper to tack the gasket in a few spots. Unfortunately it did not cure all the leaks. The spark control switch was leaking too, but I got that fixed now and so far, leak free. Thanks! BTW maybe next time I won't use my wife's counter top's flat surface to check for trueness. I tightened to 90" pounds Attached Images __________________ The lid is stuck on my jar of anti seize



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.