Non-Powered drum-drum to Power disc-drum

[clemsonteg]

Thanks. So far, I think I have been able to bend my rear line into place. I am having a hard time finding the correct adapter for the line to connect to the prop valve. It looks like the factory may have used oversized fittings to avoid plugging the line into the wrong hole, but hopefully I can find the correct adapter. if not, I guess I will cut the end of the line, put on a new fitting, and re-flare it. I suck at flaring lines so I was trying to avoid that.

For the front, I found an adapter for the crossmember tee, and I bought a pre-flared 30" piece of 3/16" line that I was able to bend to the new prop valve.