14ga lower door panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 tigger · 09-19-2015, 07:50 PM

Replaced my rusted out outer door sheet metal with 14ga metal. I cut out all the rot & coated everything with POR-15 then welded on the sheet stock. I didn't repair the inner metal (more room for the water to get away

. Hope it holds up against the salt! This is my work truck & doesn't look perfect- thanks for looking

Redline novdog · 09-20-2015, 07:24 AM

Nice job! Did you coat the inside with por-15 after welding?

72 tigger · 09-20-2015, 04:00 PM

Quote:

Originally Posted by Redline novdog

Nice job! Did you coat the inside with por-15 after welding?

Yes, I did coat everything before paint. I hope the lack of a seam at the bottom helps slow the rust

09-19-2015, 07:50 PM	#1
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,256	14ga lower door panels Replaced my rusted out outer door sheet metal with 14ga metal. I cut out all the rot & coated everything with POR-15 then welded on the sheet stock. I didn't repair the inner metal (more room for the water to get away. Hope it holds up against the salt! This is my work truck & doesn't look perfect- thanks for looking Attached Images

09-20-2015, 07:24 AM	#2
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: 14ga lower door panels Nice job! Did you coat the inside with por-15 after welding? __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.