Stainless steel full length headers 1 3/4 primary - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ss&99ss · 09-30-2015, 12:49 PM

I'm looking for a set of these for my 69 2wd C10. The truck has a turbo 350 trans. I'm putting a 383 in it that will be over 500 hp. A 1 5/8 will cover part of the exhaust port on the cylinder heads so I can't use them. Who makes set of these? It looks like Hedman and Hooker only make 1 5/8". The truck is not lowered.

GASoline71 · 09-30-2015, 01:27 PM

Oh they make them... but you need a fat wallet.

Gary

Twisted78SS · 09-30-2015, 03:05 PM

If you want really nice quality headers built specifically for our trucks, read this thread..

http://67-72chevytrucks.com/vboard/s...d.php?t=314836

67 chevelle · 09-30-2015, 03:10 PM

Ill bet dougs headers makes what you want ,but like above , they aint cheep

Andy4639 · 09-30-2015, 07:57 PM

Stainless works headers is what I used on my 6.0 LS swap.
Like already said though, they ant cheap o's!

http://stainlessworks.net/

You Tube

67ss&99ss · 09-30-2015, 08:22 PM

Do any forum members have the ones mentioned in the post above by twisted78ss on their truck? Do the collectors dump directly in front of the trans cross member? How do you have your exhausts routed?

Doug's doesn't make a header for our trucks and stainless works is like Hooker and Hedman, only 1 5/8 are offered.

Andy4639 · 09-30-2015, 08:32 PM

Wrong mine are 1 3/4".

67ss&99ss · 09-30-2015, 09:00 PM

I don't want ls series engine headers, I want them for a gen 1 small block. They only offer 1 5/8 for it.

Andy4639 · 10-01-2015, 06:36 AM

Quote:

Originally Posted by 67ss&99ss

I don't want ls series engine headers, I want them for a gen 1 small block. They only offer 1 5/8 for it.

OK that maybe. I thought I saw them though.

Here are some according to advertisement.

http://www.summitracing.com/parts/bi...FVYSHwodE5oDEw

http://www.jegs.com/i/Hedman/500/698...FVAXHwodB4ALxQ

GASoline71 · 10-01-2015, 12:03 PM

You're not looking hard enough...

http://www.summitracing.com/search/d...rder=Ascending

However... I doubt you're going to find stainless. But HOOKER and HEDMAN bioth make SBC headers for these trucks with 1 3/4" primaries. Ceramic coated will run you about $500 to $800 bucks.

Gary

*Fitz* · 10-01-2015, 06:44 PM

Quote:

Originally Posted by GASoline71

You're not looking hard enough...

http://www.summitracing.com/search/d...rder=Ascending

However... I doubt you're going to find stainless. But HOOKER and HEDMAN bioth make SBC headers for these trucks with 1 3/4" primaries. Ceramic coated will run you about $500 to $800 bucks.

Gary

Stainless headers are out there but they aren't cheap. Stainless Works has them for a Chevy Smallblock (not an LS series) with either 1-7/8 or 1-3/4 primaries for...$980.00

Twisted78SS · 10-02-2015, 12:15 PM

I was fortunate enough to grab mine from Hart_Rob, this thread should give an idea of how they fit on his 68 with a SBC.
http://67-72chevytrucks.com/vboard/s...d.php?t=562386

09-30-2015, 12:49 PM	#1
67ss&99ss Andy Join Date: Feb 2009 Location: Cleveland, GA Posts: 225	Stainless steel full length headers 1 3/4 primary I'm looking for a set of these for my 69 2wd C10. The truck has a turbo 350 trans. I'm putting a 383 in it that will be over 500 hp. A 1 5/8 will cover part of the exhaust port on the cylinder heads so I can't use them. Who makes set of these? It looks like Hedman and Hooker only make 1 5/8". The truck is not lowered. __________________ 1967 Camaro SS 406\|522hp/514ft lbs\|M20 Muncie\|3.73s\|Posi 1969 CST/10 383\|Aisin AR5 5 speed 1972 K5 350\|Turbo 350 4x4 2005 Duramax 2500HD 4x4

09-30-2015, 03:05 PM	#3
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Stainless steel full length headers 1 3/4 primary If you want really nice quality headers built specifically for our trucks, read this thread.. http://67-72chevytrucks.com/vboard/s...d.php?t=314836 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

09-30-2015, 03:10 PM	#4
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Stainless steel full length headers 1 3/4 primary Ill bet dougs headers makes what you want ,but like above , they aint cheep __________________ 68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive

09-30-2015, 08:22 PM	#6
67ss&99ss Andy Join Date: Feb 2009 Location: Cleveland, GA Posts: 225	Re: Stainless steel full length headers 1 3/4 primary Do any forum members have the ones mentioned in the post above by twisted78ss on their truck? Do the collectors dump directly in front of the trans cross member? How do you have your exhausts routed? Doug's doesn't make a header for our trucks and stainless works is like Hooker and Hedman, only 1 5/8 are offered. __________________ 1967 Camaro SS 406\|522hp/514ft lbs\|M20 Muncie\|3.73s\|Posi 1969 CST/10 383\|Aisin AR5 5 speed 1972 K5 350\|Turbo 350 4x4 2005 Duramax 2500HD 4x4 Last edited by 67ss&99ss; 09-30-2015 at 08:28 PM.

09-30-2015, 08:32 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless steel full length headers 1 3/4 primary Wrong mine are 1 3/4". __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-30-2015, 09:00 PM	#8
67ss&99ss Andy Join Date: Feb 2009 Location: Cleveland, GA Posts: 225	Re: Stainless steel full length headers 1 3/4 primary I don't want ls series engine headers, I want them for a gen 1 small block. They only offer 1 5/8 for it. __________________ 1967 Camaro SS 406\|522hp/514ft lbs\|M20 Muncie\|3.73s\|Posi 1969 CST/10 383\|Aisin AR5 5 speed 1972 K5 350\|Turbo 350 4x4 2005 Duramax 2500HD 4x4

10-02-2015, 12:15 PM	#12
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Stainless steel full length headers 1 3/4 primary I was fortunate enough to grab mine from Hart_Rob, this thread should give an idea of how they fit on his 68 with a SBC. http://67-72chevytrucks.com/vboard/s...d.php?t=562386 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.