First year for standard shoulder belts? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

donut · 11-16-2013, 08:56 PM

I didn't get pulled over for it, officer pulled in behind me in a parking lot

.

He really didn't believe the no shoulder belts, was even more shocked when the VIN tag wasn't on the dash. ('73, on door jamb. lap belts only.)

He had all my info. When he checked the registration, saw the year, he asked where the VIN tag was. Opened the drivers door, there it was. Along with me, belted in. He did look where the mounting point would be. Thanked me, and apologized. He did learn something that day. He was probably in his 20's, so had to cut him some slack.

100%Chevy · 11-16-2013, 09:23 PM

My 77 has the shoulder belts.The truck was a late in the year build.It's a plainjane,no frills truck.No options.I drive it everyday.
My 68,C-10 has the plugged holes on the B pillars.
Mike.

/

**MikeB** · 11-13-2015, 10:21 PM

67-72 RPO code A85 = shoulder belts

11-16-2013, 08:56 PM	#26
donut Registered User Join Date: Aug 2009 Location: S.C. Posts: 1,593	Re: First year for standard shoulder belts? I didn't get pulled over for it, officer pulled in behind me in a parking lot . He really didn't believe the no shoulder belts, was even more shocked when the VIN tag wasn't on the dash. ('73, on door jamb. lap belts only.) He had all my info. When he checked the registration, saw the year, he asked where the VIN tag was. Opened the drivers door, there it was. Along with me, belted in. He did look where the mounting point would be. Thanked me, and apologized. He did learn something that day. He was probably in his 20's, so had to cut him some slack. __________________ '86 C-30 dually, 454/tbh400 '73 K-20 350/350/205 (sold ) I'm kinda like duct tape- no real purpose, but handy to have around.

11-16-2013, 09:23 PM	#27
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: First year for standard shoulder belts? My 77 has the shoulder belts.The truck was a late in the year build.It's a plainjane,no frills truck.No options.I drive it everyday. My 68,C-10 has the plugged holes on the B pillars. Mike./

11-13-2015, 10:21 PM	#28
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: First year for standard shoulder belts? 67-72 RPO code A85 = shoulder belts __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.